Liquid water infiltration into a layered snowpack: evaluation of a 3-D water transport model with laboratory experiments
- 1Snow and Ice Research Center, National Research Institute for Earth Science and Disaster Resilience, Suyoshi-machi, Nagaoka-shi, Niigata-ken, 940-0821, Japan
- 2Department of Civil and Environmental Engineering, Politecnico di Milano, Milan, Italy
- anow at: Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley, USA
Abstract. The heterogeneous movement of liquid water through the snowpack during precipitation and snowmelt leads to complex liquid water distributions that are important for avalanche and runoff forecasting. We reproduced the formation of capillary barriers and the development of preferential flow through snow using a three-dimensional water transport model, which was then validated using laboratory experiments of liquid water infiltration into layered, initially dry snow. Three-dimensional simulations assumed the same column shape and size, grain size, snow density, and water input rate as the laboratory experiments. Model evaluation focused on the timing of water movement, thickness of the upper layer affected by ponding, water content profiles and wet snow fraction. Simulation results showed that the model reconstructs relevant features of capillary barriers, including ponding in the upper layer, preferential infiltration far from the interface, and the timing of liquid water arrival at the snow base. In contrast, the area of preferential flow paths was usually underestimated and consequently the averaged water content in areas characterized by preferential flow paths was also underestimated. Improving the representation of preferential infiltration into initially dry snow is necessary to reproduce the transition from a dry-snow-dominant condition to a wet-snow-dominant one, especially in long-period simulations.