<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing with OASIS Tables v3.0 20080202//EN" "journalpub-oasis3.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:oasis="http://docs.oasis-open.org/ns/oasis-exchange/table" dtd-version="3.0">
  <front>
    <journal-meta><journal-id journal-id-type="publisher">HESS</journal-id><journal-title-group>
    <journal-title>Hydrology and Earth System Sciences</journal-title>
    <abbrev-journal-title abbrev-type="publisher">HESS</abbrev-journal-title><abbrev-journal-title abbrev-type="nlm-ta">Hydrol. Earth Syst. Sci.</abbrev-journal-title>
  </journal-title-group><issn pub-type="epub">1607-7938</issn><publisher>
    <publisher-name>Copernicus Publications</publisher-name>
    <publisher-loc>Göttingen, Germany</publisher-loc>
  </publisher></journal-meta>
    <article-meta>
      <article-id pub-id-type="doi">10.5194/hess-21-6049-2017</article-id><title-group><article-title>Multiscale soil moisture estimates using static and roving<?xmltex \hack{\break}?> cosmic-ray soil
moisture sensors</article-title>
      </title-group><?xmltex \runningtitle{Multiscale soil moisture estimates}?><?xmltex \runningauthor{D. McJannet et al.}?>
      <contrib-group>
        <contrib contrib-type="author" corresp="yes" rid="aff1">
          <name><surname>McJannet</surname><given-names>David</given-names></name>
          <email>david.mcjannet@csiro.au</email>
        <ext-link>https://orcid.org/0000-0003-3100-9641</ext-link></contrib>
        <contrib contrib-type="author" corresp="no" rid="aff2">
          <name><surname>Hawdon</surname><given-names>Aaron</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff2">
          <name><surname>Baker</surname><given-names>Brett</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff3">
          <name><surname>Renzullo</surname><given-names>Luigi</given-names></name>
          
        </contrib>
        <contrib contrib-type="author" corresp="no" rid="aff1">
          <name><surname>Searle</surname><given-names>Ross</given-names></name>
          
        </contrib>
        <aff id="aff1"><label>1</label><institution>CSIRO Land and Water, EcoSciences Precinct, Dutton Park, Brisbane, QLD,
Australia</institution>
        </aff>
        <aff id="aff2"><label>2</label><institution>CSIRO Land and Water, ATSIP, James Cook University, Townsville, QLD, Australia</institution>
        </aff>
        <aff id="aff3"><label>3</label><institution>CSIRO Land and Water, Canberra, ACT, Australia</institution>
        </aff>
      </contrib-group>
      <author-notes><corresp id="corr1">David McJannet (david.mcjannet@csiro.au)</corresp></author-notes><pub-date><day>1</day><month>December</month><year>2017</year></pub-date>
      
      <volume>21</volume>
      <issue>12</issue>
      <fpage>6049</fpage><lpage>6067</lpage>
      <history>
        <date date-type="received"><day>23</day><month>June</month><year>2017</year></date>
           <date date-type="rev-request"><day>12</day><month>July</month><year>2017</year></date>
           <date date-type="rev-recd"><day>22</day><month>September</month><year>2017</year></date>
           <date date-type="accepted"><day>29</day><month>October</month><year>2017</year></date>
      </history>
      <permissions>
        
        
      <license license-type="open-access"><license-p>This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this licence, visit <ext-link ext-link-type="uri" xlink:href="https://creativecommons.org/licenses/by/4.0/">https://creativecommons.org/licenses/by/4.0/</ext-link></license-p></license></permissions><self-uri xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017.html">This article is available from https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017.html</self-uri><self-uri xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017.pdf">The full text article is available as a PDF file from https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017.pdf</self-uri>
      <abstract>
    <p id="d1e130">Soil moisture plays a critical role in land surface processes and as such
there has been a recent increase in the number and resolution of satellite
soil moisture observations and the development of land surface process models
with ever increasing resolution. Despite these developments, validation and
calibration of these products has been limited because of a lack of
observations on corresponding scales. A recently developed mobile soil
moisture monitoring platform, known as the “rover”, offers opportunities to
overcome this scale issue. This paper describes methods, results and testing
of soil moisture estimates produced using rover surveys on a range of scales
that are commensurate with model and satellite retrievals. Our investigation
involved static cosmic-ray neutron sensors and rover surveys across both
broad (36 <inline-formula><mml:math id="M1" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 36 km at 9 km resolution) and intensive
(10 <inline-formula><mml:math id="M2" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10 km at 1 km resolution) scales in a cropping district in
the Mallee region of Victoria, Australia. We describe approaches for
converting rover survey neutron counts to soil moisture and discuss the
factors controlling soil moisture variability. We use independent gravimetric
and modelled soil moisture estimates collected across both space and time to
validate rover soil moisture products. Measurements revealed that temporal
patterns in soil moisture were preserved through time and regression
modelling approaches were utilised to produce time series of property-scale
soil moisture which may also have applications in calibration and validation
studies or local farm management. Intensive-scale rover surveys produced
reliable soil moisture estimates at 1 km resolution while broad-scale
surveys produced soil moisture estimates at 9 km resolution. We conclude
that the multiscale soil moisture products produced in this study are well
suited to future analysis of satellite soil moisture retrievals and finer-scale soil moisture models.</p>
  </abstract>
    </article-meta>
  </front>
<body>
      

<sec id="Ch1.S1" sec-type="intro">
  <title>Introduction</title>
      <p id="d1e154">Soil moisture has a strong influence on land–atmosphere interactions,
hydrological processes, ecosystem functioning and agricultural productivity.
The importance of this variable has led to an increase in the number and
resolution of satellite soil moisture observations and the ongoing
development of finer-resolution land surface process models (Ochsner et al.,
2013). Despite these developments, our ability to validate and/or calibrate
these products is limited because of a lack of observations on matching
scales. Satellite observations typically have resolutions in the order of 3
to 50 km, while broad-area modelling of soil moisture variability typically
occurs at resolutions <inline-formula><mml:math id="M3" display="inline"><mml:mo>&gt;</mml:mo></mml:math></inline-formula> 1 km. The scale of these products are orders of
magnitude larger than those of traditional in situ sensors, which creates an
issue because of the well-documented small-scale variability in soil moisture
(Vereecken et al., 2014; Western and Blöschl, 1999). Some researchers
have overcome this issue by establishing soil moisture monitoring networks
(Bogena et al., 2010; Smith et al., 2012), but the extent of sensor networks
is still relatively small (<inline-formula><mml:math id="M4" display="inline"><mml:mo>&lt;</mml:mo></mml:math></inline-formula> 1 km<inline-formula><mml:math id="M5" display="inline"><mml:mrow><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>.</p>
      <p id="d1e183">More recently cosmic-ray neutron sensors (CRNSs) have been deployed to provide
soil moisture estimates on the hectometre scale (circular footprint,
260–600 m diameter) (Desilets and Zreda, 2013; Köhli et al., 2015).
CRNSs measure naturally generated neutrons that are produced by cosmic
rays passing through the Earth's atmosphere. Recent measurement and modelling
studies (Andreasen et al., 2017a, b) have shown that the CRNSs measure
neutrons in both the thermal (<inline-formula><mml:math id="M6" display="inline"><mml:mo>&lt;</mml:mo></mml:math></inline-formula> 1 eV) and epithermal ranges
(<inline-formula><mml:math id="M7" display="inline"><mml:mo>&gt;</mml:mo></mml:math></inline-formula> 1–1000 eV) and that sensitivities to energy range vary with
environmental features present at a site (e.g. tree canopy, crop, litter).
The neutron intensity above the soil surface is inversely correlated with
soil moisture as it responds to the hydrogen contained in the soil and plant
water and to a lesser degree to plant and soil carbon compounds (Desilets et
al., 2010). The scale match between the CRNS technique and satellite
observations has led to a number of recent studies which compare CRNS
observations to satellite observations (Renzullo et al., 2014; Montzka et
al., 2017; Kędzior and Zawadzki, 2016) and land surface models
(Vinodkumar et al., 2017; Holgate et al., 2016) and use CRNS observation to
parameterise models (Baatz et al., 2017; Rivera Villarreyes et al., 2014).
Development of networks of CRNS across a number of countries (e.g. USA: Zreda
et al., 2012; UK: Evans et al., 2016, Germany; Baatz et al., 2014; and
Australia: Hawdon et al., 2014) is providing useful time series of soil
moisture information which will be valuable for years to come.</p>
      <p id="d1e200">While the CRNS provides a better match to the scale of satellite retrievals
and model estimates there is still a scale mismatch that prevents direct
full-scale validation of these products. To address this, a mobile CRNS,
called the cosmic-ray rover, has been developed (Desilets et al., 2010). The
rover uses the same technology as the CRNS but its design allows for mobile
mapping of soil moisture across the landscape. This mobile mapping capability
allows for soil moisture surveys to be undertaken over areas commensurate
with satellite pixels or model domains, thereby filling the gap in soil
moisture observations (Chrisman and Zreda, 2013). The earliest use of the
cosmic-ray rover was for repeated surveys across an area of
25 <inline-formula><mml:math id="M8" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 40 km in the Tucson Basin in order to produce a catchment-scale water balance (Chrisman and Zreda, 2013). Dong et al. (2014) used a
rover to map soil moisture on multiple occasions over a 16 <inline-formula><mml:math id="M9" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10 km
and a 34 <inline-formula><mml:math id="M10" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 14 km region in Oklahoma with the aim of evaluating
satellite soil moisture estimates. More recently Franz et al. (2015) combined
rover surveys over a 12 <inline-formula><mml:math id="M11" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 12 km area in Nebraska with CRNS
measurements to develop a technique for multiscale real-time soil moisture
monitoring.</p>
      <p id="d1e231">This paper describes part of a research project aimed at producing soil
moisture estimates on a range of scales for eventual comparison to satellite
and modelled soil moisture estimates. The focus of this paper is on
establishing techniques for producing spatial representations of soil
moisture using CRNSs and a cosmic-ray rover. We will present a nested
set of broad-scale and intensive-scale rover survey results which were
collected across a 36 <inline-formula><mml:math id="M12" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 36 km area in a cropping district in the Mallee
region of Victoria, Australia, and we will describe techniques used to convert
rover measurements into soil moisture estimates using CRNSs and
spatial soil property information. Using statistical relationships between
property-scale soil moisture from rover surveys and CRNSs, we will
present a simple approach for producing real-time property-scale soil
moisture estimates in the local area. We also use our observations on
different scales to test the reliability of our experimental design.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F1" specific-use="star"><caption><p id="d1e244">Location of field site in western Victoria, Australia. The yellow
rectangle shows extent of broad-scale rover surveys (36 <inline-formula><mml:math id="M13" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 36 km)
and the red rectangle shows extent of intensive surveys (10 <inline-formula><mml:math id="M14" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10 km).
Blue and red stars indicate the location of the Bishes and Bennetts
cosmic-ray neutron sensors. Imagery data: Google, TerraMetrics 2017.</p></caption>
        <?xmltex \igopts{width=298.753937pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f01.png"/>

      </fig>

</sec>
<sec id="Ch1.S2">
  <title>Methods</title>
<sec id="Ch1.S2.SS1">
  <title>Site description</title>
      <p id="d1e278">The study area is located in the Shire of Buloke in the Mallee region of
Victoria, Australia (Fig. 1). The measurement campaign took place across a
36 <inline-formula><mml:math id="M15" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 36 km region centred on <inline-formula><mml:math id="M16" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>35.684<inline-formula><mml:math id="M17" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> S,
142.858<inline-formula><mml:math id="M18" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> E, which lies between the towns of Birchip to the south and
Sea Lake to the north. The Mallee is a rain-fed agricultural region with
wheat and barley being widely grown. Much of the native vegetation has been
removed since European settlement. In the region of interest the landscape is
flat with an elevation ranging between 50 to 120 m a.s.l. The climate of
the area is classified as semi-arid with an average annual rainfall of
368 mm, an average daily minimum temperature in July of 3.6 <inline-formula><mml:math id="M19" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C and
an average daily maximum temperature in January of 30.7 <inline-formula><mml:math id="M20" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C (Anwar
et al., 2007).</p>
</sec>
<sec id="Ch1.S2.SS2">
  <title>Static cosmic-ray neutron sensors</title>
      <p id="d1e338">Cosmic-ray neutron sensors were installed at two locations in the designated
field survey area (Fig. 1). These two locations are named Bishes (northern
probe) and Bennetts (southern probe). Each of these sensors included a single
polyethylene shielded cosmic-ray probe (CRP-1000B, Hydroinnova, Albuquerque,
USA), which monitors neutron intensity in the epithermal to fast neutron
energy range. Each system also measured barometric pressure, temperature and
relative humidity, which are required for measurement correction procedures.
The system was programmed to record data at hourly intervals and was sent via
satellite telemetry (Iridium SBD services) in near-real-time to a database on
a remote server (<uri>http://cosmoz.csiro.au</uri>) (Hawdon et al., 2014). Prior
to deployment, the two static sensors were run side-by-side for a period of
4 days to determine if there were any differences in counting rates that were
not attributable to local conditions. Over this period the average counting
rate differed by less than 1 %, thus giving confidence that differences
between sensors reflect local site characteristics alone.</p>
      <p id="d1e344">In order to isolate the effect of soil moisture on neutron count measurements
it is first necessary to remove variation due to other environmental factors.
The largest correction that is required is an adjustment for changes in
atmospheric pressure, but there are also corrections required for changes in
atmospheric water vapour and changes in the intensity of the incoming neutron
flux. The standard correction procedures implemented across the CosmOz
network have been described in detail by Hawdon et al. (2014), and therefore only
a brief summary will be provided here.</p>
      <p id="d1e347">Cosmic-ray neutron intensity is particularly sensitive to elevation or the
mass of air above the sensor, which is accounted for by the by the correction
factor, <inline-formula><mml:math id="M21" display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi>P</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>, which is defined as an exponential relationship with
barometric pressure (Zreda et al., 2008):

                <disp-formula id="Ch1.E1" content-type="numbered"><mml:math id="M22" display="block"><mml:mrow><mml:mstyle class="stylechange" displaystyle="true"/><mml:msub><mml:mi>f</mml:mi><mml:mi>P</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mi>exp⁡</mml:mi><mml:mfenced open="[" close="]"><mml:mi mathvariant="italic">β</mml:mi><mml:mfenced close=")" open="("><mml:mi>P</mml:mi><mml:mo>-</mml:mo><mml:msub><mml:mi>P</mml:mi><mml:mtext>ref</mml:mtext></mml:msub></mml:mfenced></mml:mfenced><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>

          where <inline-formula><mml:math id="M23" display="inline"><mml:mi>P</mml:mi></mml:math></inline-formula> is atmospheric pressure (mbar) and <inline-formula><mml:math id="M24" display="inline"><mml:mrow><mml:msub><mml:mi>P</mml:mi><mml:mtext>ref</mml:mtext></mml:msub></mml:mrow></mml:math></inline-formula> is the reference
atmospheric pressure (mbar), which is calculated using standard formulas based
on site elevation (NASA, 1976). The atmospheric attenuation coefficient
(<inline-formula><mml:math id="M25" display="inline"><mml:mi mathvariant="italic">β</mml:mi></mml:math></inline-formula>, cm<inline-formula><mml:math id="M26" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula> g<inline-formula><mml:math id="M27" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> or mbar<inline-formula><mml:math id="M28" display="inline"><mml:mrow><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> for neutron-generating cosmic
rays has been calculated for each of our sites using the method described by
Desilets et al. (2006).</p>
      <p id="d1e454">Water vapour in the atmosphere has the same neutron-moderating capacity as
water in the soil and as such will influence the total neutron count (Zreda
et al., 2012). A correction factor for atmospheric water vapour effects was
developed by Rosolem et al. (2013) and it utilises near-surface absolute
humidity (<inline-formula><mml:math id="M29" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">ρ</mml:mi><mml:mrow><mml:mtext>v</mml:mtext><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math></inline-formula>, g m<inline-formula><mml:math id="M30" display="inline"><mml:mrow><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>, which is derived from
measurements of temperature, atmospheric pressure and humidity. The
correction factor for atmospheric water vapour (<inline-formula><mml:math id="M31" display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mtext>wv</mml:mtext></mml:msub></mml:mrow></mml:math></inline-formula>) is derived
from the following:

                <disp-formula id="Ch1.E2" content-type="numbered"><mml:math id="M32" display="block"><mml:mrow><mml:mstyle displaystyle="true" class="stylechange"/><mml:msub><mml:mi>f</mml:mi><mml:mtext>wv</mml:mtext></mml:msub><mml:mo>=</mml:mo><mml:mn mathvariant="normal">1</mml:mn><mml:mo>+</mml:mo><mml:mn mathvariant="normal">0.0054</mml:mn><mml:mfenced close=")" open="("><mml:msub><mml:mi mathvariant="italic">ρ</mml:mi><mml:mrow><mml:mtext>v</mml:mtext><mml:mn mathvariant="normal">0</mml:mn></mml:mrow></mml:msub><mml:mo>-</mml:mo><mml:msubsup><mml:mi mathvariant="italic">ρ</mml:mi><mml:mrow><mml:mtext>v</mml:mtext><mml:mn mathvariant="normal">0</mml:mn></mml:mrow><mml:mtext>ref</mml:mtext></mml:msubsup></mml:mfenced><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>

          where <inline-formula><mml:math id="M33" display="inline"><mml:mrow><mml:msubsup><mml:mi mathvariant="italic">ρ</mml:mi><mml:mrow><mml:mtext>v</mml:mtext><mml:mn mathvariant="normal">0</mml:mn></mml:mrow><mml:mtext>ref</mml:mtext></mml:msubsup></mml:mrow></mml:math></inline-formula> is the reference absolute humidity,
which we set to 0 g m<inline-formula><mml:math id="M34" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (i.e. dry air).</p>
      <p id="d1e570">To account for variations in incoming neutron flux an intensity correction
factor is calculated by normalising the source intensity to a fixed point in
time (Zreda et al., 2012). The correction factor for incoming neutron
intensity (<inline-formula><mml:math id="M35" display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">i</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) is expressed as follows:

                <disp-formula id="Ch1.E3" content-type="numbered"><mml:math id="M36" display="block"><mml:mrow><mml:mstyle class="stylechange" displaystyle="true"/><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">i</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>I</mml:mi><mml:mtext>m</mml:mtext></mml:msub></mml:mrow><mml:mrow><mml:msub><mml:mi>I</mml:mi><mml:mtext>ref</mml:mtext></mml:msub></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>

          where <inline-formula><mml:math id="M37" display="inline"><mml:mrow><mml:msub><mml:mi>I</mml:mi><mml:mi mathvariant="normal">m</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is the selected neutron monitor counting rate at any
particular point in time and <inline-formula><mml:math id="M38" display="inline"><mml:mrow><mml:msub><mml:mi>I</mml:mi><mml:mi mathvariant="normal">ref</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is a reference counting rate
for the same neutron monitor from an arbitrary fixed point in time which is
1 May 2011. Neutron monitor data are sourced from the Neutron Monitor Database
(NMDB; <uri>http://www.nmdb.eu</uri>). Both of these sites utilise data from the
Lomnický štít Observatory in Slovakia.</p>
      <p id="d1e639">The counting rate is also scaled to sea level and high latitude to enable
comparison between sensors. Scaling factors for converting counting rate to
sea level (<inline-formula><mml:math id="M39" display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">s</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) and high latitude (<inline-formula><mml:math id="M40" display="inline"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">l</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) are described
by Desilets and Zreda (2003) and Desilets et al. (2006).</p>
      <p id="d1e664">Final corrected counts (<inline-formula><mml:math id="M41" display="inline"><mml:mrow><mml:mi>N</mml:mi><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> are calculated using the following equation:

                <disp-formula id="Ch1.E4" content-type="numbered"><mml:math id="M42" display="block"><mml:mrow><mml:mstyle class="stylechange" displaystyle="true"/><mml:mi>N</mml:mi><mml:mo>=</mml:mo><mml:msub><mml:mi>N</mml:mi><mml:mi mathvariant="normal">raw</mml:mi></mml:msub><mml:mfenced open="(" close=")"><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi>P</mml:mi></mml:msub><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">wv</mml:mi></mml:msub></mml:mrow><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">i</mml:mi></mml:msub></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced><mml:mfenced close=")" open="("><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">s</mml:mi></mml:msub></mml:mrow><mml:mrow><mml:msub><mml:mi>f</mml:mi><mml:mi mathvariant="normal">l</mml:mi></mml:msub></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>

          where <inline-formula><mml:math id="M43" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mi mathvariant="normal">raw</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is the uncorrected neutron count from the CRP.
Corrected neutron counts were converted to volumetric soil moisture content
(<inline-formula><mml:math id="M44" display="inline"><mml:mrow><mml:mi mathvariant="italic">θ</mml:mi><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> using the calibration function generated by Desilets et
al. (2010) and modified by Bogena et al. (2013):

                <disp-formula id="Ch1.E5" content-type="numbered"><mml:math id="M45" display="block"><mml:mrow><mml:mstyle displaystyle="true" class="stylechange"/><mml:mi mathvariant="italic">θ</mml:mi><mml:mo>=</mml:mo><mml:mfenced close=")" open="("><mml:mstyle displaystyle="true"><mml:mfrac style="display"><mml:mn mathvariant="normal">0.0808</mml:mn><mml:mrow><mml:mfenced close=")" open="("><mml:mstyle displaystyle="false"><mml:mfrac style="text"><mml:mi>N</mml:mi><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:mfrac></mml:mstyle></mml:mfenced><mml:mo>-</mml:mo><mml:mn mathvariant="normal">0.372</mml:mn></mml:mrow></mml:mfrac></mml:mstyle><mml:mo>-</mml:mo><mml:mn mathvariant="normal">0.115</mml:mn><mml:mo>-</mml:mo><mml:msub><mml:mi>w</mml:mi><mml:mi mathvariant="normal">lat</mml:mi></mml:msub><mml:mo>-</mml:mo><mml:msub><mml:mi>w</mml:mi><mml:mi mathvariant="normal">SOM</mml:mi></mml:msub></mml:mfenced><mml:msub><mml:mi mathvariant="italic">ρ</mml:mi><mml:mi mathvariant="normal">bd</mml:mi></mml:msub><mml:mo>,</mml:mo></mml:mrow></mml:math></disp-formula>

          where <inline-formula><mml:math id="M46" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> is the neutron intensity in air above a dry soil which is
obtained from field calibration, <inline-formula><mml:math id="M47" display="inline"><mml:mrow><mml:msub><mml:mi>w</mml:mi><mml:mi mathvariant="normal">lat</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is lattice water content
of the soil, <inline-formula><mml:math id="M48" display="inline"><mml:mrow><mml:msub><mml:mi>w</mml:mi><mml:mi mathvariant="normal">SOM</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is soil organic matter expressed as a water
equivalent (see below), and <inline-formula><mml:math id="M49" display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="italic">ρ</mml:mi><mml:mi mathvariant="normal">bd</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula> is bulk density of the soil.</p>
      <p id="d1e853">Field calibration at each site involved collection of gravimetric and
volumetric soil samples at three distances from the probe (25, 100 and
200 m) along each cardinal and inter-cardinal direction (i.e. 8 radial
directions). At each sample point, soil cores were taken to calculate
volumetric soil moisture content for three depths (0 to 5, 10 to 15 and 25
to 30 cm), giving a total of 72 samples per calibration. Water content from
samples was determined by drying samples at 105 <inline-formula><mml:math id="M50" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C for 24 h (Klute,
1986). The depth-weighted soil moisture from field calibration was calculated
using the method proposed by Franz et al. (2012) and corresponding corrected
neutron count is used to determine <inline-formula><mml:math id="M51" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> in Eq. (5). Hydrogen held within
the lattice structure of the soil minerals and organic material can also
effect neutron count rate and, hence, need to be considered in calculation
procedures. Lattice water (<inline-formula><mml:math id="M52" display="inline"><mml:mrow><mml:msub><mml:mi>w</mml:mi><mml:mi mathvariant="normal">lat</mml:mi></mml:msub></mml:mrow></mml:math></inline-formula>) was determined from the amount
of water released at 1000 <inline-formula><mml:math id="M53" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C preceded by drying at 105 <inline-formula><mml:math id="M54" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C.
Soil organic carbon was estimated by measuring total organic carbon in
samples using Heanes wet oxidation, method 6B1 in Rayment and
Higginson (1992). Following Franz et al. (2013) and Bogena et al. (2013), the
organic carbon was assumed to be present as cellulose,
C<inline-formula><mml:math id="M55" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">6</mml:mn></mml:msub></mml:math></inline-formula>H<inline-formula><mml:math id="M56" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">10</mml:mn></mml:msub></mml:math></inline-formula>O<inline-formula><mml:math id="M57" display="inline"><mml:msub><mml:mi/><mml:mn mathvariant="normal">5</mml:mn></mml:msub></mml:math></inline-formula>, and this was converted into an equivalent amount of
water (<inline-formula><mml:math id="M58" display="inline"><mml:mrow><mml:msub><mml:mi>w</mml:mi><mml:mtext>SOM</mml:mtext></mml:msub></mml:mrow></mml:math></inline-formula>) by multiplying measured soil organic carbon by 0.556,
which is the ratio of 5 times the molecular weight of water to the
molecular weight of cellulose.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F2" specific-use="star"><caption><p id="d1e946">Rover survey extents and sampling points for the broad-scale and
intensive-scale measurement campaigns. Sampling points from April 2016. The
yellow box (<inline-formula><mml:math id="M59" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 36 km <inline-formula><mml:math id="M60" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 36 km) delineates the broad-scale
survey extent and the red box (<inline-formula><mml:math id="M61" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 10 km <inline-formula><mml:math id="M62" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10 km) delineates
the intensive-scale survey extent. Blue points in each figure represent
approximate locations of gravimetric soil moisture sampling points.</p></caption>
          <?xmltex \igopts{width=398.338583pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f02.png"/>

        </fig>

</sec>
<sec id="Ch1.S2.SS3">
  <title>Rover system</title>
      <p id="d1e989">The rover system is based around a set of 16 custom-made tube capsules
supplied by Hydroinnova (Albuquerque, USA), which are similar to those used
for the static cosmic-ray neutron sensors but larger. The rover has counting
rates approximately 18 times greater than that of a standard static sensor
under the same condition, thus allowing for measurements to be made at 1 min intervals. For a volumetric soil moisture content of 10 % a count
rate of around 350 counts per minute was recorded. The set of 16 tubes is
mounted in a trailer from which additional measurements of air temperature,
relative humidity, atmospheric pressure and location were also made. Pictures
of the rover system are available on the CosmOz web page
(<uri>http://cosmoz.csiro.au/about-cosmoz/</uri>). While mobile, the measurements
from the system were monitored in real-time on a screen in the cabin of the
tow vehicle. A dash mounted camera was also used to collect images at one
minute intervals during the survey.</p>
      <p id="d1e995">For this investigation a nested design of broad-scale and intensive localised
measurements was implemented. The broad-scale design included a survey over
an area with dimensions of approximately 36 <inline-formula><mml:math id="M63" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 36 km which
encapsulated a single Soil Moisture Active Passive (SMAP) satellite pixel.
Using typical counting rates for this area and by targeting an output
resolution for soil moisture of 9 <inline-formula><mml:math id="M64" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 9 km, we calculated that the
maximum driving speed for this survey was 90 km h<inline-formula><mml:math id="M65" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. This provided a
good density of measurement points for interpolation purposes. The survey
area and measurement points from the driving track are shown in Fig. 2. The
broad-scale surveys typically took 10 h to complete, involved over 600
measurements and the average speed travelled was around 60 km h<inline-formula><mml:math id="M66" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. The
intensive-scale survey covered an area of approximately 10 <inline-formula><mml:math id="M67" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 10 km
and was located in the south-eastern corner of the broad-scale survey
(Fig. 2). In this survey a target resolution for soil moisture of
1 <inline-formula><mml:math id="M68" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 1 km was used for which we calculated that the maximum driving
speed should not exceed 30 km h<inline-formula><mml:math id="M69" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. Much of the driving for the
intensive-scale surveys was around field boundaries and on unsealed roads. At
1 km resolution the intensive-scale survey results were well matched to farm
property scale in this region. Intensive-scale surveys also took
approximately 10 h to complete with more than 600 measurement point being
collected. The average speed during these surveys was 20 km h<inline-formula><mml:math id="M70" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">1</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>.
Survey tracks were defined for both surveys prior to undertaking measurement
using maps of the local road network. These maps were loaded into GIS
software and were used to guide navigation on each survey run.</p>
      <p id="d1e1075">The nested design of the intensive- and broad-scale surveys (Fig. 2) enables
the accuracy of broad-scale survey estimates to be assessed. To undertake
such an analysis we selected a 9 <inline-formula><mml:math id="M71" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 9 km area within the area of
survey overlap (Fig. 2) and derived corresponding soil moisture at
resolutions of 1, 3 and 9 km. In such an analysis the intensive survey
results are considered as a point of truth for broad survey results.</p>
      <p id="d1e1085">As well as enabling production of direct farm property-scale estimates at
the time of the surveys, the intensive-scale survey results were used to
derive a soil moisture product of much higher time resolution on the property
scale. This was achieved using spatial regression analysis with the
continuous soil moisture measurements at the static CRNS observations at
Bennetts. Linear regression equations were derived for each property by
comparing the soil moisture content at the Bennetts CRNS versus the
corresponding rover survey soil moisture for each property in turn. Using
this approach, regression relationships were developed between the Bennetts
CRNS and 50 properties identified within the intensive survey area for the
three surveys undertaken. These relationships enable production of
continuous farm property scale in this area. This approach assumes that
rainfall is relatively uniform across the region and that crops are planted
across all periods, both of which are typical in this study area.</p>
      <p id="d1e1089">Procedures used for correcting static cosmic-ray neutron sensor counts
(Eqs. 1 to 4) were also applied to the rover data. Continually varying
elevation, location, pressure, temperature and humidity were used for these
calculations. Soil moisture was also calculated in the same way as for the
static sensors (Eq. 5) but there was a requirement for spatial information
regarding bulk density, soil organic matter and lattice water content. The
Soil and Landscape Grid of Australia provides
<inline-formula><mml:math id="M72" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 90 <inline-formula><mml:math id="M73" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> <inline-formula><mml:math id="M74" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 90 m pixels of digital soil attributes,
including bulk density (Viscarra Rossel et al., 2014a) and soil organic
carbon (Viscarra Rossel et al., 2014b) at depths of 0–5, 5–15 and
15–30 cm which are useful for applying to rover surveys. The Soil and
Landscape Grid of Australia does not provide any lattice water information
but it does provide information on clay content (Viscarra Rossel et al.,
2014c) and others (Greacen, 1981; Avery et al., 2016) have shown that clay
content is often a good predictor of lattice water. In this study we
investigated whether such a relationship exists for the soils in the study
area. To do this we collected 36 samples for lattice water analysis; this
included 25 distributed samples in the broad-scale survey area, 9 samples
across the intensive-scale survey area and the 2 samples collected as part of
the calibration of the static probes. These samples were from cores extracted
from 0–30 cm depth. The spatial maps of bulk density, clay content and
organic carbon used in the rover calculation procedures are shown in Fig. 3;
also shown for site characterisation is the digital elevation model for the
survey area.</p>
      <p id="d1e1113">Use of Eq. (5) in rover surveys also requires specification of a suitable
<inline-formula><mml:math id="M75" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> value. For the static sensors this value is derived through the
calibration procedures. To calculate <inline-formula><mml:math id="M76" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> for the rover we undertook
side-by-side comparisons with the static sensors which involved parking next
to a static sensor for 12 h prior to a survey. The average counts from the
rover and static sensor were then compared to derive a suitable scaling
approach to derive a rover-specific <inline-formula><mml:math id="M77" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>. Similar cosmic-ray neutron
sensor cross-calibrations were undertaken by Baatz et al. (2015) to account
for sensor-specific differences. Both broad-scale and intensive-scale surveys
were undertaken on three separate occasions on consecutive days during
April 2016, June 2016 and March 2017.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F3" specific-use="star"><caption><p id="d1e1151">Field survey area DEM <bold>(a)</bold>, depth-weighted 0–30 cm bulk
density <bold>(b)</bold>, depth-weighted 0–30 cm clay content <bold>(c)</bold> and
depth-weighted 0–30 cm organic matter content <bold>(d)</bold>.</p></caption>
          <?xmltex \igopts{width=412.564961pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f03.png"/>

        </fig>

      <p id="d1e1172">Interpolation of the rover count data was required to produce a spatial
representation of count rates for the entire survey area. To achieve this the
Variogram Estimation and Spatial Prediction with Error (VESPER) software
package (Minasny et al., 2005) was used. VESPER was used to undertake
conventional kriging with a global variogram. An exponential variogram model
was used for both survey scales and an interpolated grid of corrected rover
count rate was produced at 90 m resolution to match that of the underlying
soils information.</p>
</sec>
<sec id="Ch1.S2.SS4">
  <title>Comparison datasets</title>
      <p id="d1e1181">Two independent datasets were utilised for comparison to soil moisture
estimates from our rover surveys: (1) opportunistic point samples collected
during each survey and (2) modelled soil moisture estimates from the
Australian Bureau of Meteorology's Australian Water Resources Assessment
Landscape model, known as AWRA-L.</p>
      <p id="d1e1184">Soil samples were collected at approximate predefined points, as shown in
Fig. 2, during each of the rover surveys. A full set of samples was collected
during the April 2016 surveys and smaller sub-sets were collected during the
later surveys. At each sampling location a single 0–30 cm core was
extracted. Gravimetric water content for these cores was determined by drying
samples at 105 <inline-formula><mml:math id="M78" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula>C for 24 h. For comparison purposes, rover
volumetric soil moisture estimates for the nearest pixel (9 km resolution
for broad scale and 1 km resolution for intensive) were extracted and
divided by the corresponding average bulk density for that pixel to produce
an equivalent gravimetric estimate of soil moisture. We note here that there
is a large-scale discrepancy between these datasets and highlight that the
point samples only offer an approximate guide as to the accuracy of rover
survey results.</p>
      <p id="d1e1196">AWRA-L is a daily 0.05<inline-formula><mml:math id="M79" display="inline"><mml:msup><mml:mi/><mml:mo>∘</mml:mo></mml:msup></mml:math></inline-formula> (<inline-formula><mml:math id="M80" display="inline"><mml:mo>∼</mml:mo></mml:math></inline-formula> 5 km) grid-based, distributed water
balance model. It simulates the flow of water through the landscape with
rainfall entering the grid cell through the vegetation and soil moisture
stores and leaving the grid cell through evapotranspiration, runoff or deep
drainage to the groundwater. The implementation and testing of the AWRA-L
model has been described by numerous authors (Wallace et al., 2013; Van Dijk,
2010; Viney et al., 2014). Of
particular interest to this study is the AWRA-L estimate of root zone soil
moisture which covers a depth of 0–100 cm. The root zone represents a
deeper soil zone than the effective depth of the rover but provides our best
source of comparison data. When comparing 5 km resolution AWRA-L soil
moisture estimates to those from the 9 km resolution broad-scale rover
survey, the nearest AWRA-L pixel to the 9 km pixel centroid was used. When
comparing the AWRA-L soil moisture to the 1 km resolution intensive-scale
survey, the intensive-scale pixels were grouped to produce a corresponding
5 km resolution product. AWRA-L soil moisture was reported in percentage
capacity between 0 and 100 % while the rover results were in volumetric
units; no attempt was made to convert between units and the comparison
focused on the strength of the fit between the datasets.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F4"><caption><p id="d1e1217">Calibration curves for converting corrected neutron counts to soil
moisture content for the Bishes and Bennetts cosmic-ray soil moisture
sensors. The dry soil counting rate, <inline-formula><mml:math id="M81" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, is 1583 counts per hour for Bishes
and 1541 counts per hour for Bennetts.</p></caption>
          <?xmltex \igopts{width=204.859843pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f04.png"/>

        </fig>

<?xmltex \floatpos{t}?><table-wrap id="Ch1.T1" specific-use="star"><caption><p id="d1e1241">Side-by-side comparison of average neutron counts for the static
CRNS's (Bishes and Bennetts) and the rover for four different 12 h periods.
Also shown are the average soil moisture values for each date, static CRP to
rover scaling factors and derived dry soil counting rate, <inline-formula><mml:math id="M82" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>, for the
rover. All counts are in counts per minute for application to rover data.</p></caption><oasis:table frame="topbot"><?xmltex \begin{scaleboxenv}{.85}[.85]?><oasis:tgroup cols="8">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="left"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:colspec colnum="4" colname="col4" align="right"/>
     <oasis:colspec colnum="5" colname="col5" align="right"/>
     <oasis:colspec colnum="6" colname="col6" align="right"/>
     <oasis:colspec colnum="7" colname="col7" align="right"/>
     <oasis:colspec colnum="8" colname="col8" align="right"/>
     <oasis:thead>
       <oasis:row>  
         <oasis:entry colname="col1">Date</oasis:entry>  
         <oasis:entry colname="col2">Site</oasis:entry>  
         <oasis:entry colname="col3">Static CRNS</oasis:entry>  
         <oasis:entry colname="col4">Static CRNS</oasis:entry>  
         <oasis:entry colname="col5">Rover average</oasis:entry>  
         <oasis:entry colname="col6">Static to</oasis:entry>  
         <oasis:entry colname="col7">Static CRNS</oasis:entry>  
         <oasis:entry colname="col8">Derived</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"/>  
         <oasis:entry colname="col3">average counts</oasis:entry>  
         <oasis:entry colname="col4">average soil moisture</oasis:entry>  
         <oasis:entry colname="col5">counts</oasis:entry>  
         <oasis:entry colname="col6">rover scaling</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math id="M83" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col8">rover <inline-formula><mml:math id="M84" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"/>  
         <oasis:entry colname="col3">(counts per minute)</oasis:entry>  
         <oasis:entry colname="col4">(m<inline-formula><mml:math id="M85" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M86" display="inline"><mml:mrow><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry colname="col5">(counts per minute)</oasis:entry>  
         <oasis:entry colname="col6">factor</oasis:entry>  
         <oasis:entry colname="col7">(counts per minute)</oasis:entry>  
         <oasis:entry colname="col8">(counts per minute)</oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>  
         <oasis:entry colname="col1">10 Apr 2016</oasis:entry>  
         <oasis:entry colname="col2">Bishes</oasis:entry>  
         <oasis:entry colname="col3">21.74</oasis:entry>  
         <oasis:entry colname="col4">0.08</oasis:entry>  
         <oasis:entry colname="col5">370.0</oasis:entry>  
         <oasis:entry colname="col6">17.0</oasis:entry>  
         <oasis:entry colname="col7">26.4</oasis:entry>  
         <oasis:entry colname="col8">449</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">1 Mar 2017</oasis:entry>  
         <oasis:entry colname="col2">Bishes</oasis:entry>  
         <oasis:entry colname="col3">20.4</oasis:entry>  
         <oasis:entry colname="col4">0.10</oasis:entry>  
         <oasis:entry colname="col5">364.8</oasis:entry>  
         <oasis:entry colname="col6">17.9</oasis:entry>  
         <oasis:entry colname="col7">26.4</oasis:entry>  
         <oasis:entry colname="col8">471</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">9 Jun 2016</oasis:entry>  
         <oasis:entry colname="col2">Bennetts</oasis:entry>  
         <oasis:entry colname="col3">15.23</oasis:entry>  
         <oasis:entry colname="col4">0.28</oasis:entry>  
         <oasis:entry colname="col5">268.1</oasis:entry>  
         <oasis:entry colname="col6">17.6</oasis:entry>  
         <oasis:entry colname="col7">25.7</oasis:entry>  
         <oasis:entry colname="col8">452</oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1">2 Mar 2017</oasis:entry>  
         <oasis:entry colname="col2">Bennetts</oasis:entry>  
         <oasis:entry colname="col3">16.8</oasis:entry>  
         <oasis:entry colname="col4">0.16</oasis:entry>  
         <oasis:entry colname="col5">307.6</oasis:entry>  
         <oasis:entry colname="col6">16.8</oasis:entry>  
         <oasis:entry colname="col7">25.7</oasis:entry>  
         <oasis:entry colname="col8">469</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2"/>  
         <oasis:entry colname="col3"/>  
         <oasis:entry colname="col4"/>  
         <oasis:entry colname="col5">Average</oasis:entry>  
         <oasis:entry colname="col6">17.3</oasis:entry>  
         <oasis:entry colname="col7">Average</oasis:entry>  
         <oasis:entry colname="col8">460</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup><?xmltex \end{scaleboxenv}?></oasis:table></table-wrap>

      <?xmltex \floatpos{t}?><fig id="Ch1.F5"><caption><p id="d1e1543">Clay content versus lattice water showing sample points from the study
area and fitted relationship. Also shown for reference is the relationship
proposed by Greacen (1981).</p></caption>
          <?xmltex \igopts{width=187.788189pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f05.png"/>

        </fig>

<?xmltex \hack{\newpage}?>
</sec>
</sec>
<sec id="Ch1.S3">
  <title>Results</title>
<sec id="Ch1.S3.SS1">
  <title>Static CRNS calibration</title>
      <p id="d1e1566">Calibration of the two CRNS occurred under different soil moisture
conditions; at Bennetts the depth-weighted soil moisture content was
0.13 m<inline-formula><mml:math id="M87" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M88" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>, while at Bishes it was 0.08 m<inline-formula><mml:math id="M89" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M90" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>.
Fitting of the calibration curve to these two sites (Fig. 4) resulted in very
similar dry soil (<inline-formula><mml:math id="M91" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula> counting rates, with analysis of the data collected
at Bennetts producing an <inline-formula><mml:math id="M92" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> of 1541 counts per hour and that from Bishes
producing an <inline-formula><mml:math id="M93" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> of 1583 counts per hour. Across the soil moisture range of
0 to 0.5 m<inline-formula><mml:math id="M94" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M95" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> the average soil moisture difference between the
two curves in Fig. 4 was 0.019 m<inline-formula><mml:math id="M96" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M97" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. These differences are very
small and reflect the fact that hydrogen represented by the biomass pool is
basically non-existent at these sites.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F6"><caption><p id="d1e1691">Example variograms used for block kriging for broad-scale and
intensive surveys. The broad-scale variogram is from April 2016 <bold>(a)</bold>
and the intensive-scale variogram is from June 2016 <bold>(b)</bold>. The sill
and the range are shown in <bold>(b)</bold>.</p></caption>
          <?xmltex \igopts{width=241.848425pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f06.png"/>

        </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F7" specific-use="star"><caption><p id="d1e1711">Interpolated corrected neutron counts (left column) and derived soil
moisture (right column) for the three intensive-scale surveys during
April 2016, June 2016 and March 2017. Blue and red stars indicate the
location of the Bishes and Bennetts cosmic-ray neutron sensors.</p></caption>
          <?xmltex \igopts{width=384.112205pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f07.png"/>

        </fig>

</sec>
<sec id="Ch1.S3.SS2">
  <title>Rover calibration</title>
      <p id="d1e1726">Calibration of the rover was undertaken through side-by-side comparison with
the Bennetts CRNS and the Bishes CRNS on two separate occasions each. These
comparisons covered a range of soil moisture conditions over four separate
12 h periods. Table 1 shows the corresponding neutron count rate for the
rover and each CRNS and the scaling factor that converts static CRNS counting
rate to a rover equivalent; this scaling factor is used to scale the <inline-formula><mml:math id="M98" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula>
values derived for each static sensor to an equivalent <inline-formula><mml:math id="M99" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> for the rover.
Despite the differences in conditions and site characteristics, the scaling
factor remained relatively constant, as did the derived <inline-formula><mml:math id="M100" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> for each
comparison period. Given the relatively constant relationship between the
rover and static sensors an average <inline-formula><mml:math id="M101" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> of 460 counts per minute was derived
and this value was applied across all surveys.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F8" specific-use="star"><caption><p id="d1e1775">Comparison of Bennetts and Bishes CRNS soil moisture estimates and
corresponding intensive rover survey estimates for the CRNS locations for the
three survey dates. Rover survey estimate is from 1 km resolution pixel
corresponding to each CRNS location.</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f08.png"/>

        </fig>

      <?xmltex \floatpos{t}?><fig id="Ch1.F9" specific-use="star"><caption><p id="d1e1786">Intensive rover survey gravimetric soil moisture (1 km resolution)
versus point sample gravimetric soil moisture <bold>(a)</bold> and intensive
rover survey soil moisture (up-scaled to 5 km resolution) versus AWRA-L root
zone soil moisture (5 km resolution).</p></caption>
          <?xmltex \igopts{width=384.112205pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f09.png"/>

        </fig>

<?xmltex \hack{\newpage}?>
</sec>
<sec id="Ch1.S3.SS3">
  <title>Spatial lattice water information</title>
      <p id="d1e1806">A comparison of clay content and lattice water content for 36 spatially
distributed samples shows a strong linear relationship (<inline-formula><mml:math id="M102" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.7</mml:mn></mml:mrow></mml:math></inline-formula>) across
a broad range of clay content (4–56 %) (Fig. 5). This relationship was
applied to the spatial clay content dataset from the Soil and Landscape Grid
of Australia (Viscarra Rossel et al., 2014c) to produce an equivalent lattice
water dataset at 90 m resolution which was utilised in rover surveys.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F10" specific-use="star"><caption><p id="d1e1826">Location of target properties within the intensive-scale survey area
(red box) and property-average soil moisture content for March 2017. Blue and
red stars indicate the location of the Bishes and Bennetts cosmic-ray neutron
sensors.</p></caption>
          <?xmltex \igopts{width=369.885827pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f10.png"/>

        </fig>

</sec>
<sec id="Ch1.S3.SS4">
  <title>Spatial estimation</title>
      <p id="d1e1841">Example variograms from the kriging procedures used for broad-scale and
intensive surveys are shown in Fig. 6. Both surveys utilise exponential
variogram models; however, the fit is different, with the intensive-scale
surveys having a distinct “sill” and broad-scale variograms showing no
“sill” at all. The “sill” in a variogram represents the value at which
the fitted model levels out (see Fig. 6). The presence of a sill indicates
that there is a distance (known as the “range”) between pairs of points
beyond which there is no spatial correlation. The range is important as it is
related to the spatial scale of the variability in neutron intensity. The
lack of a sill for the broad-scale survey reflects differences in variability
in neutron observations on this larger scale. The variogram model for the
intensive surveys showed more cyclicity (or the “hole effect”) which could be
related to underlying geological periodicity (Yang and Kaleita, 2007). The
empirical variograms were well described by the exponential models, giving
confidence in interpolated rover counts across the respective survey areas.</p>
</sec>
<sec id="Ch1.S3.SS5">
  <title>Intensive-scale rover surveys</title>
      <p id="d1e1851">Interpolated counts and derived volumetric soil moisture content for each of
the three intensive-scale surveys are shown in Fig. 7. A large range in soil
moisture content was observed over the three surveys, with values ranging
between 0.01 m<inline-formula><mml:math id="M103" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M104" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> in April 2016 through to
0.30 m<inline-formula><mml:math id="M105" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M106" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> in June 2016. Higher than
average counting rates and, hence, lower soil moisture were consistently
observed in the central northern region of the survey area. This area is
characterised by a ridge of sandy soil with rock fragments and is known
locally as “Sandhill”. Wetter soil moisture conditions were observed
through the central and southern parts of the survey area.</p>
      <p id="d1e1896">Comparison of intensive rover survey soil moisture estimates for the CRNS
locations at the three different survey dates shows excellent agreement
between the two measurement methods (Fig. 8). The rover survey estimate is
taken from the 1 km resolution soil moisture estimate for the corresponding
CRNS pixel. Comparisons of estimates for the Bennetts CRNS shows differences
of less than 0.025 m<inline-formula><mml:math id="M107" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M108" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> for all three occasions. The rover
survey estimates tended to underestimate the soil moisture measured at the
Bishes CRNS. The largest difference was during the April 2016 survey where
soil moisture was underestimated by 0.04 m<inline-formula><mml:math id="M109" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M110" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. It is possible
that this underestimation is a result of local interpolation issues. The
Bishes CRNS is in close proximity to the sandy ridge known as Sandhill
which represents a distinct zone of low soil moisture (Fig. 7). The effect of
this abrupt change is likely to be “smoothed” within the area that also
encompasses the Bishes CRNS.</p>
      <p id="d1e1941">Figure 9a shows a comparison of rover gravimetric soil moisture against
corresponding soil moisture from the grab samples collected during each
survey. The comparison shows strong correlation (<inline-formula><mml:math id="M111" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.80</mml:mn></mml:mrow></mml:math></inline-formula>) and data
points are scattered around the 1 : 1 line. There is more scatter observed
in the data under wetter conditions but this is likely to be related to a
greater relative difference in spatial soil moisture following rainfall
events. Similarly, the comparison of rover volumetric soil moisture against
modelled root zone soil moisture from the AWRA-L model (Fig. 9b) also shows
good correlation (<inline-formula><mml:math id="M112" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.79</mml:mn></mml:mrow></mml:math></inline-formula>). This comparison is complicated by the fact
that the rover estimate represents an effective measurement depth of between
10 and 25 cm while the root zone soil moisture is an estimate between 0 and
100 cm; despite this the agreement is still good. Comparison of these two
independent soil moisture products with the rover surveys increases
confidence in rover survey results on the intensive scale.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F11" specific-use="star"><caption><p id="d1e1976">Time series of average soil moisture for selected properties in the
intensive-scale survey area and corresponding soil moisture time series from
the Bennetts cosmic-ray neutron sensor. Scaling relations ships are provided
in Table A1.</p></caption>
          <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f11.png"/>

        </fig>

      <p id="d1e1986">The rover surveys on the intensive scale also offer the opportunity to
estimate soil moisture on the farm property scale. A number of properties in
the intensive-scale zone are identified in Fig. 10 and the intensive-scale
rover survey from March 2017 has been used to derive property-average soil
moisture conditions in this figure. The average size of the identified
properties is approximately 1 km<inline-formula><mml:math id="M113" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:math></inline-formula>.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F12" specific-use="star"><caption><p id="d1e2000">Interpolated corrected neutron counts (left column) and derived soil
moisture (right column) for the three broad-scale surveys during April 2016,
June 2016 and March 2017. Blue and red stars indicate the location of the
Bishes and Bennetts cosmic-ray neutron sensors.</p></caption>
          <?xmltex \igopts{width=384.112205pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f12.png"/>

        </fig>

      <p id="d1e2009">Point-to-area linear regression modelling based on continuous CRNS
measurements from the Bennetts sensor and three intensive rover surveys was
applied to 50 properties identified in the intensive survey area and very
strong linear relationships were derived with an average <inline-formula><mml:math id="M114" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula> value of
0.97 (range <inline-formula><mml:math id="M115" display="inline"><mml:mo>=</mml:mo></mml:math></inline-formula> 0.87–1.00, see Table A1 in Appendix A for full results).
We note here that only three surveys were available for developing these
relationship, and further surveys and cross-validation are recommended for
future work. Application of these regression models to derive time series of
property-scale soil moisture for three example properties is given in
Fig. 11.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F13" specific-use="star"><caption><p id="d1e2032">Broad-scale rover survey gravimetric soil moisture (9 km
resolution) versus point sample gravimetric soil moisture <bold>(a)</bold> and
broad-scale rover survey soil moisture (9 km resolution) versus AWRA-L root
zone soil moisture (5 km resolution).</p></caption>
          <?xmltex \igopts{width=369.885827pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f13.png"/>

        </fig>

</sec>
<sec id="Ch1.S3.SS6">
  <title>Broad-scale rover surveys</title>
      <p id="d1e2050">Interpolated counts and derived volumetric soil moisture content for each of
the three broad-scale surveys is shown in Fig. 12. The common feature of all
of the survey dates is the tendency for higher counts and, hence, lower soil
moisture to occur at the north-western region of the survey area and lower
counts and, hence, higher soil moisture to occur in the south-eastern region.
These patterns reflect soil textures in the region, with sandier soils and
dunes with low clay content in the north-west and higher clay content
soils in south-east. The driest soil moisture conditions were experienced
during the April 2016 survey, with a mean soil moisture of
0.05 m<inline-formula><mml:math id="M116" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M117" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (range <inline-formula><mml:math id="M118" display="inline"><mml:mo>=</mml:mo></mml:math></inline-formula> 0.01–0.10 m<inline-formula><mml:math id="M119" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M120" display="inline"><mml:mrow><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>, and the
wettest were observed during the June 2016 survey, with a mean soil moisture
of 0.17 m<inline-formula><mml:math id="M121" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M122" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> (range <inline-formula><mml:math id="M123" display="inline"><mml:mo>=</mml:mo></mml:math></inline-formula> 0.09–0.27 m<inline-formula><mml:math id="M124" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M125" display="inline"><mml:mrow><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>. The
March 2017 survey provided intermediate soil moisture conditions with a mean
for the region of 0.09 m<inline-formula><mml:math id="M126" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M127" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>
(range <inline-formula><mml:math id="M128" display="inline"><mml:mo>=</mml:mo></mml:math></inline-formula> 0.04–0.15 m<inline-formula><mml:math id="M129" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M130" display="inline"><mml:mrow><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>.</p>
      <p id="d1e2211">Figure 13a shows a comparison of rover gravimetric soil moisture against
corresponding soil moisture from the grab samples collected during each
survey. The comparison shows reasonable correlation (<inline-formula><mml:math id="M131" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.64</mml:mn></mml:mrow></mml:math></inline-formula>) and data
points tend to be scattered around the 1 : 1 line. Given the scale
difference between these products (9 km versus point sample) the observed
scatter is not surprising. Figure 13b shows a comparison of rover volumetric
soil moisture against modelled root zone soil moisture from the AWRA-L model.
The closer scale match between these two products (9 km versus 5 km), when
compared to the point samples, results in a much higher correlation between
the two datasets (<inline-formula><mml:math id="M132" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup><mml:mo>=</mml:mo><mml:mn mathvariant="normal">0.78</mml:mn></mml:mrow></mml:math></inline-formula>). As with the intensive survey comparison,
interpretation of the results is complicated because the measurement depth of
the rover (10 to 25 cm) is much less than the AWRA-L root zone soil moisture
(0 to 100 cm). Despite these differences the two products are still
remarkably well correlated and the good agreement between the rover estimates
and the AWRA-L estimates, both spatially and across a range of soil moisture
conditions, provides further evidence that the rover experimental design and
data processing procedures are reliable.</p>
      <p id="d1e2244">Broad-scale survey soil moisture estimates were also tested by comparison
with intensive survey results on scales of 1, 3 and 9 km in an overlapping
9 <inline-formula><mml:math id="M133" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 9 km region (Fig. 2). The difference in soil moisture estimates
between the broad- and intensive-scale surveys for different resolutions on
each of the three survey dates is shown in Fig. 14. The broad-scale survey
estimates are clearly not a good representation of 1 <inline-formula><mml:math id="M134" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 1 km scale
soil moisture as survey speeds and sampling points are not detailed enough to
pick up local soil moisture variations at current counting rates. Differences
of up to <inline-formula><mml:math id="M135" display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula>0.10 m<inline-formula><mml:math id="M136" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M137" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> were observed. At 3 <inline-formula><mml:math id="M138" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 3 km
resolution the performance of the broad-scale survey estimates improves but
there are still some distinct zones where soil moisture differed by as much
as <inline-formula><mml:math id="M139" display="inline"><mml:mo>±</mml:mo></mml:math></inline-formula>0.06 m<inline-formula><mml:math id="M140" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M141" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. On the 9 <inline-formula><mml:math id="M142" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 9 km scale, for which
the broad-scale surveys were designed, differences in soil moisture between
the intensive- and broad-scale surveys was minimal. On all three occasions the
difference was less than 0.005 m<inline-formula><mml:math id="M143" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M144" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula>. These comparisons validate
our broad-scale experimental design and give confidence in the
9 <inline-formula><mml:math id="M145" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 9 km resolution soil moisture produced from our rover surveys.</p>
</sec>
</sec>
<sec id="Ch1.S4">
  <title>Discussion</title>
      <p id="d1e2368">Static CRNS calibration at Bishes and Bennetts produced very similar dry soil
counting rate (<inline-formula><mml:math id="M146" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula>. This similarity has resulted because hydrogen in
soil water, lattice water and organic matter is accounted for in the
calibration process and because both sites are devoid of above-ground
biomass. The effect of biomass on <inline-formula><mml:math id="M147" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> has been noted by Hawdon et
al. (2014) who compared <inline-formula><mml:math id="M148" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> values from eight probes from across the
Australian CRNS network with site biomass and also by Baatz et al. (2015) who
proposed an empirical biomass correction for CRNS calibration. This finding
has important implications for rover surveys in this region as the landscape
in the Mallee region is almost entirely cleared of forest and above-ground
biomass is represented by pasture and crop cover. McJannet et al. (2014)
calculated that pasture represented a biomass water equivalent of just
0.6 mm, a value similar to that derived by Baatz et al. (2015) for areas
dominated by crops; these small values show that these small hydrogen pools
will have little impact on neutron counts (McJannet et al., 2014).</p>
      <p id="d1e2406">In this present study the <inline-formula><mml:math id="M149" display="inline"><mml:mrow><mml:msub><mml:mi>N</mml:mi><mml:mn mathvariant="normal">0</mml:mn></mml:msub></mml:mrow></mml:math></inline-formula> value for converting rover neutron counting
rates to soil moisture content was derived through side by side comparison
with the two CRNSs. A similar approach was employed by Chrisman and
Zreda (2013) using a single CRNS as a reference point and by Dong et
al. (2014) using a network of in situ measurements. Rover surveys undertaken
by Franz et al. (2015) also used comparison with static CRNSs but in
their investigations a further correction was introduced to account for
variations in above-ground biomass. Locations with greater biomass should
adopt calibration schemes that include this hydrogen pool (i.e. Baatz et
al., 2015; Franz et al., 2013).</p>
      <p id="d1e2420">Rover surveys require information on the spatial variation in bulk density,
soil organic matter and lattice water for calculation of soil moisture
content using conventional approaches. While pre-existing bulk density and
organic matter datasets exist for Australia we had to derive a lattice water
dataset based on a strong region-wide relationship with clay content. The
relationship we derived for the study area was different to that proposed by
Greacen (1981) for Australian soils and may reflect differences in the soil
types included in the analysis. With the intent of producing a similar
spatial lattice water dataset for the continental United States, Avery et
al. (2016) derived relationships with clay content but found that
relationships were weak for many soil taxonomic groups. For best local results
a spatial sampling such as that utilised in this present study is
recommended.</p>
      <p id="d1e2423">A factor that has not been accounted for in our rover surveys is the
potential impacts of roads on our survey results. By design roads will have a
low moisture content and the impact of this narrow strip within the sensor
footprint on survey results has not yet been accounted for in any operational
rover studies reported in the literature. Using neutron modelling approaches,
Köhli et al. (2015) demonstrated that a CRNS is most sensitive to soil
moisture in the nearest tens of metres and showed that dry roads can
contribute to an overestimate of neutron counts by a few percent. The dry
roads will be over-represented in the measured neutron intensity as the
sensitivity of neutron intensity to hydrogen is greater at the dry end of the
scale (Andreasen et al., 2017a). A more recent study by Schrön et
al. (2017) using neutron transport simulations and dedicated field
experiments supports the findings of Köhli et al. (2015). Schrön et
al. (2017) found that the effects of roads are greatest when surrounding soil
moisture is much higher than road moisture content. In the survey areas in
which our broad-scale rover surveys were undertaken, more than 70 % of the
roads were unsealed and many of the sealed roads were only one lane wide;
while this does not remove the issue it does lessen the potential impact on
reported results considerably. The impact of roads on our intensive-scale
surveys is likely to be even less as 60 % of the observations were made
while driving around property boundaries (i.e. not properly formed roads) and
a further 30 % were on unsealed roads. While the impact of roads may not
be a major issue for the present study it is an issue that
warrants consideration in future surveys.</p>

      <?xmltex \floatpos{t}?><fig id="Ch1.F14" specific-use="star"><caption><p id="d1e2429">Difference in soil moisture estimates between the broad- and
intensive-scale surveys for different resolutions on each of the three survey
dates. Each cell represents a 1 km <inline-formula><mml:math id="M150" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 1 km region within the
intensive survey zone.</p></caption>
        <?xmltex \igopts{width=341.433071pt}?><graphic xlink:href="https://hess.copernicus.org/articles/21/6049/2017/hess-21-6049-2017-f14.pdf"/>

      </fig>

      <p id="d1e2445">Intensive-scale surveys were designed to produce a 1 <inline-formula><mml:math id="M151" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 1 km
resolution soil moisture product, and comparison to static CRNS observations,
spatially distributed point samples and AWRA-L model predictions support
this. While the point samples and model estimates cannot be considered the
“truth” they do provide a good guide as to rover performance and the
agreement with these estimates provides confidence in intensive-scale rover
results. Detailed soil moisture maps highlight the impact that soil
properties have on observed soil moisture, with sandier locations being
typically drier when compared to those with more clay. Property-scale soil
moisture estimates led to the development of point-to-area style regression
models which then enabled continuous estimates of soil moisture to be made on
the property scale. Property-scale regression models were strong but it is
noted that these are based on data from three surveys. A more thorough
investigation is recommended and this should include further surveys and
cross-validation experiments. The opportunity also exists to use similar
point-to-area scaling techniques to derive high temporal resolution soil
moisture products at other set resolutions (e.g. 1 km) which would make for
ideal datasets for testing model and satellite soil moisture estimates. The
regression modelling undertaken showed that temporal patterns in soil
moisture were strong. Similar observations have been reported for other
studies (Kachanoski and Jong, 1988; Grayson and Western, 1998; Vachaud et
al., 1985). According to Yang and Kaleita (2007), spatial patterns of soil
moisture exhibit some degree of temporal stability, which is related to time-invariant attributes such as topography and soil characteristics. With the
relatively flat topography in Mallee study area and the assumption that
rainfall inputs and crop growth are similar between properties, it is likely
that differences in the slopes and intercepts of the relationship between CRNS
observations and property-scale soil moisture (see Table A1) are being
controlled by local soil characteristics. Changes in local crops and local-scale differences in rainfall inputs (i.e. small convective storms) do of
course have the potential to change these point-to-area relationships but if
these factors can be accounted for then useful spatial and temporal soil
moisture datasets can be produced.</p>
      <p id="d1e2455">Comparison of broad-scale rover soil moisture estimates against those from
point samples and the AWRA-L model showed good agreement across both space
and time, thus providing further evidence that the rover experimental design
and data processing procedures were reliable. Agreement between rover
estimates and model estimates was particularly good and this reflects the
closer match in scale of these two products. Comparison with emerging
satellite, measurement and modelled soil moisture products will help to
further assess rover approaches and results in the future. Broad-scale
surveys produced reliable soil moisture estimates at 9 <inline-formula><mml:math id="M152" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 9 km
resolution, although the faster survey speeds and lower measurement density
meant that this survey was unable to distinguish many of the smaller-scale
soil moisture variations revealed at the finer resolution and slower survey
speeds of the intensive-scale survey. This clearly supports the need to
design rover surveys for the scale of analysis to be eventually undertaken.</p>
</sec>
<sec id="Ch1.S5" sec-type="conclusions">
  <title>Conclusion</title>
      <p id="d1e2472">In this study we presented an investigation designed to produce soil
moisture estimates across a range of scales. Our investigation involved
static CRNSs and rover surveys on both broad and intensive scales. We
established techniques for converting neutron-counting rates from the rover
to soil moisture using side-by-side comparisons with static CRNSs and
spatial datasets of soil characteristics. In particular we found that
lattice water was strongly related to clay content in the study area and
used this relationship to derive a spatial representation of lattice water.</p>
      <p id="d1e2475">Rover surveys were undertaken across soils ranging in moisture content from
0.01 to 0.30 m<inline-formula><mml:math id="M153" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M154" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup></mml:math></inline-formula> and comparison with spatial distributed point
samples and model estimates showed that reliable results were produced across
all conditions. The slower driving speeds and denser sampling network of the
intensive surveys provided representation of local soil moisture variations
at resolutions down to 1 <inline-formula><mml:math id="M155" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 1 km. Stability in observed spatial
patterns of soil moisture were used in a regression modelling approach to
produce time series of property-scale soil moisture based on CRNS
observations. Broad-scale surveys, which incorporated higher driving speeds
and sparser sampling points, were shown to produce excellent representations
of soil moisture at 9 <inline-formula><mml:math id="M156" display="inline"><mml:mo>×</mml:mo></mml:math></inline-formula> 9 km pixel resolution making them well
suited for assessing variation in this parameter on a regional scale. The
multiscale application of the rover makes it a unique tool for addressing
soil moisture questions across scales previously not possible. The multiscale
soil moisture products produced in this study are well suited to future
analysis of both satellite soil moisture retrievals and finer-scale soil
moisture models.</p><?xmltex \hack{\newpage}?>
</sec>

      
      </body>
    <back><notes notes-type="dataavailability">

      <p id="d1e2518">Data used for this study are available from the lead author (david.mcjannet@csiro.au).</p>
  </notes><?xmltex \hack{\clearpage}?><app-group>

<app id="App1.Ch1.S1">
  <title/>

<?xmltex \floatpos{h!}?><table-wrap id="App1.Ch1.T1"><?xmltex \hack{\hsize\textwidth}?><caption><p id="d1e2533">Supplementary information from regression
analysis relating CRNS observations to property-average soil moisture content
in the intensive-scale survey zone. The first line shown in italics is the static CRNS against which all properties are compared.</p></caption><oasis:table frame="topbot"><oasis:tgroup cols="7">
     <oasis:colspec colnum="1" colname="col1" align="left"/>
     <oasis:colspec colnum="2" colname="col2" align="right"/>
     <oasis:colspec colnum="3" colname="col3" align="right"/>
     <oasis:colspec colnum="4" colname="col4" align="right" colsep="1"/>
     <oasis:colspec colnum="5" colname="col5" align="right"/>
     <oasis:colspec colnum="6" colname="col6" align="right"/>
     <oasis:colspec colnum="7" colname="col7" align="right"/>
     <oasis:thead>
       <oasis:row>  
         <oasis:entry colname="col1">Property</oasis:entry>  
         <oasis:entry rowsep="1" namest="col2" nameend="col4" align="center" colsep="1">Soil moisture (m<inline-formula><mml:math id="M157" display="inline"><mml:msup><mml:mi/><mml:mn mathvariant="normal">3</mml:mn></mml:msup></mml:math></inline-formula> m<inline-formula><mml:math id="M158" display="inline"><mml:mrow><mml:msup><mml:mi/><mml:mrow><mml:mo>-</mml:mo><mml:mn mathvariant="normal">3</mml:mn></mml:mrow></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math></inline-formula></oasis:entry>  
         <oasis:entry rowsep="1" namest="col5" nameend="col7" align="center">Regression modelling results </oasis:entry>
       </oasis:row>
       <oasis:row rowsep="1">  
         <oasis:entry colname="col1"/>  
         <oasis:entry colname="col2">April 2016</oasis:entry>  
         <oasis:entry colname="col3">June 2016</oasis:entry>  
         <oasis:entry colname="col4">Mar 2017</oasis:entry>  
         <oasis:entry colname="col5">Slope</oasis:entry>  
         <oasis:entry colname="col6">Intercept</oasis:entry>  
         <oasis:entry colname="col7"><inline-formula><mml:math id="M159" display="inline"><mml:mrow><mml:msup><mml:mi>R</mml:mi><mml:mn mathvariant="normal">2</mml:mn></mml:msup></mml:mrow></mml:math></inline-formula></oasis:entry>
       </oasis:row>
     </oasis:thead>
     <oasis:tbody>
       <oasis:row>  
         <oasis:entry colname="col1"><italic>Bennetts CRNS</italic></oasis:entry>  
         <oasis:entry colname="col2"><italic>0.124</italic></oasis:entry>  
         <oasis:entry colname="col3"><italic>0.277</italic></oasis:entry>  
         <oasis:entry colname="col4"><italic>0.157</italic></oasis:entry>  
         <oasis:entry colname="col5"/>  
         <oasis:entry colname="col6"/>  
         <oasis:entry colname="col7"/>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">54 – Sandhill Central</oasis:entry>  
         <oasis:entry colname="col2">0.065</oasis:entry>  
         <oasis:entry colname="col3">0.152</oasis:entry>  
         <oasis:entry colname="col4">0.080</oasis:entry>  
         <oasis:entry colname="col5">0.575</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M160" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.008</oasis:entry>  
         <oasis:entry colname="col7">0.999</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">26 – Whirily</oasis:entry>  
         <oasis:entry colname="col2">0.103</oasis:entry>  
         <oasis:entry colname="col3">0.294</oasis:entry>  
         <oasis:entry colname="col4">0.140</oasis:entry>  
         <oasis:entry colname="col5">1.257</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M161" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.055</oasis:entry>  
         <oasis:entry colname="col7">1.000</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">34 – North West</oasis:entry>  
         <oasis:entry colname="col2">0.070</oasis:entry>  
         <oasis:entry colname="col3">0.199</oasis:entry>  
         <oasis:entry colname="col4">0.095</oasis:entry>  
         <oasis:entry colname="col5">0.848</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M162" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.036</oasis:entry>  
         <oasis:entry colname="col7">0.999</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">09 – Bennetts</oasis:entry>  
         <oasis:entry colname="col2">0.097</oasis:entry>  
         <oasis:entry colname="col3">0.264</oasis:entry>  
         <oasis:entry colname="col4">0.139</oasis:entry>  
         <oasis:entry colname="col5">1.076</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M163" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.034</oasis:entry>  
         <oasis:entry colname="col7">0.998</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">21 – Arnolds</oasis:entry>  
         <oasis:entry colname="col2">0.079</oasis:entry>  
         <oasis:entry colname="col3">0.216</oasis:entry>  
         <oasis:entry colname="col4">0.147</oasis:entry>  
         <oasis:entry colname="col5">0.809</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M164" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.003</oasis:entry>  
         <oasis:entry colname="col7">0.905</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">25 – School</oasis:entry>  
         <oasis:entry colname="col2">0.082</oasis:entry>  
         <oasis:entry colname="col3">0.222</oasis:entry>  
         <oasis:entry colname="col4">0.136</oasis:entry>  
         <oasis:entry colname="col5">0.858</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M165" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.013</oasis:entry>  
         <oasis:entry colname="col7">0.968</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">17 – Jil Jil East</oasis:entry>  
         <oasis:entry colname="col2">0.077</oasis:entry>  
         <oasis:entry colname="col3">0.181</oasis:entry>  
         <oasis:entry colname="col4">0.097</oasis:entry>  
         <oasis:entry colname="col5">0.685</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M166" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.009</oasis:entry>  
         <oasis:entry colname="col7">0.999</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">14 – Sandhill South</oasis:entry>  
         <oasis:entry colname="col2">0.074</oasis:entry>  
         <oasis:entry colname="col3">0.202</oasis:entry>  
         <oasis:entry colname="col4">0.104</oasis:entry>  
         <oasis:entry colname="col5">0.828</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M167" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.027</oasis:entry>  
         <oasis:entry colname="col7">1.000</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">24 – Box</oasis:entry>  
         <oasis:entry colname="col2">0.079</oasis:entry>  
         <oasis:entry colname="col3">0.223</oasis:entry>  
         <oasis:entry colname="col4">0.118</oasis:entry>  
         <oasis:entry colname="col5">0.922</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M168" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.032</oasis:entry>  
         <oasis:entry colname="col7">0.997</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">29 – Hancocks</oasis:entry>  
         <oasis:entry colname="col2">0.086</oasis:entry>  
         <oasis:entry colname="col3">0.210</oasis:entry>  
         <oasis:entry colname="col4">0.139</oasis:entry>  
         <oasis:entry colname="col5">0.749</oasis:entry>  
         <oasis:entry colname="col6">0.006</oasis:entry>  
         <oasis:entry colname="col7">0.947</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">13 – Billabong</oasis:entry>  
         <oasis:entry colname="col2">0.092</oasis:entry>  
         <oasis:entry colname="col3">0.254</oasis:entry>  
         <oasis:entry colname="col4">0.128</oasis:entry>  
         <oasis:entry colname="col5">1.052</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M169" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.038</oasis:entry>  
         <oasis:entry colname="col7">1.000</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">38 – 30 Acre</oasis:entry>  
         <oasis:entry colname="col2">0.081</oasis:entry>  
         <oasis:entry colname="col3">0.187</oasis:entry>  
         <oasis:entry colname="col4">0.106</oasis:entry>  
         <oasis:entry colname="col5">0.688</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M170" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.003</oasis:entry>  
         <oasis:entry colname="col7">1.000</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">18 – Barley</oasis:entry>  
         <oasis:entry colname="col2">0.105</oasis:entry>  
         <oasis:entry colname="col3">0.227</oasis:entry>  
         <oasis:entry colname="col4">0.141</oasis:entry>  
         <oasis:entry colname="col5">0.777</oasis:entry>  
         <oasis:entry colname="col6">0.013</oasis:entry>  
         <oasis:entry colname="col7">0.992</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">16 – Bishes East</oasis:entry>  
         <oasis:entry colname="col2">0.027</oasis:entry>  
         <oasis:entry colname="col3">0.132</oasis:entry>  
         <oasis:entry colname="col4">0.057</oasis:entry>  
         <oasis:entry colname="col5">0.674</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M171" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.053</oasis:entry>  
         <oasis:entry colname="col7">0.995</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">08 – Connelly's</oasis:entry>  
         <oasis:entry colname="col2">0.093</oasis:entry>  
         <oasis:entry colname="col3">0.223</oasis:entry>  
         <oasis:entry colname="col4">0.123</oasis:entry>  
         <oasis:entry colname="col5">0.845</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M172" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.011</oasis:entry>  
         <oasis:entry colname="col7">1.000</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">11 – South McKenzies</oasis:entry>  
         <oasis:entry colname="col2">0.106</oasis:entry>  
         <oasis:entry colname="col3">0.261</oasis:entry>  
         <oasis:entry colname="col4">0.144</oasis:entry>  
         <oasis:entry colname="col5">1.003</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M173" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.016</oasis:entry>  
         <oasis:entry colname="col7">0.999</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">32 – Far West</oasis:entry>  
         <oasis:entry colname="col2">0.063</oasis:entry>  
         <oasis:entry colname="col3">0.192</oasis:entry>  
         <oasis:entry colname="col4">0.124</oasis:entry>  
         <oasis:entry colname="col5">0.765</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M174" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.016</oasis:entry>  
         <oasis:entry colname="col7">0.919</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">36 – Bishes West</oasis:entry>  
         <oasis:entry colname="col2">0.043</oasis:entry>  
         <oasis:entry colname="col3">0.166</oasis:entry>  
         <oasis:entry colname="col4">0.091</oasis:entry>  
         <oasis:entry colname="col5">0.754</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M175" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.040</oasis:entry>  
         <oasis:entry colname="col7">0.962</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">40 – Watsons</oasis:entry>  
         <oasis:entry colname="col2">0.092</oasis:entry>  
         <oasis:entry colname="col3">0.222</oasis:entry>  
         <oasis:entry colname="col4">0.125</oasis:entry>  
         <oasis:entry colname="col5">0.839</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M176" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.009</oasis:entry>  
         <oasis:entry colname="col7">0.998</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">50 – Hogans</oasis:entry>  
         <oasis:entry colname="col2">0.087</oasis:entry>  
         <oasis:entry colname="col3">0.236</oasis:entry>  
         <oasis:entry colname="col4">0.127</oasis:entry>  
         <oasis:entry colname="col5">0.957</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M177" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.028</oasis:entry>  
         <oasis:entry colname="col7">0.996</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">51 – Hennessy's</oasis:entry>  
         <oasis:entry colname="col2">0.089</oasis:entry>  
         <oasis:entry colname="col3">0.254</oasis:entry>  
         <oasis:entry colname="col4">0.159</oasis:entry>  
         <oasis:entry colname="col5">1.000</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M178" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.019</oasis:entry>  
         <oasis:entry colname="col7">0.947</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">23 – O'Keefes</oasis:entry>  
         <oasis:entry colname="col2">0.062</oasis:entry>  
         <oasis:entry colname="col3">0.187</oasis:entry>  
         <oasis:entry colname="col4">0.099</oasis:entry>  
         <oasis:entry colname="col5">0.793</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M179" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.031</oasis:entry>  
         <oasis:entry colname="col7">0.992</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">22 – Alfies</oasis:entry>  
         <oasis:entry colname="col2">0.071</oasis:entry>  
         <oasis:entry colname="col3">0.197</oasis:entry>  
         <oasis:entry colname="col4">0.108</oasis:entry>  
         <oasis:entry colname="col5">0.801</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M180" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.024</oasis:entry>  
         <oasis:entry colname="col7">0.993</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">15 – Sandhill North</oasis:entry>  
         <oasis:entry colname="col2">0.045</oasis:entry>  
         <oasis:entry colname="col3">0.122</oasis:entry>  
         <oasis:entry colname="col4">0.063</oasis:entry>  
         <oasis:entry colname="col5">0.504</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M181" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.017</oasis:entry>  
         <oasis:entry colname="col7">0.999</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">35 – Jil Jil West</oasis:entry>  
         <oasis:entry colname="col2">0.057</oasis:entry>  
         <oasis:entry colname="col3">0.164</oasis:entry>  
         <oasis:entry colname="col4">0.072</oasis:entry>  
         <oasis:entry colname="col5">0.721</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M182" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.036</oasis:entry>  
         <oasis:entry colname="col7">0.995</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">30 – Hancocks Hill</oasis:entry>  
         <oasis:entry colname="col2">0.054</oasis:entry>  
         <oasis:entry colname="col3">0.188</oasis:entry>  
         <oasis:entry colname="col4">0.128</oasis:entry>  
         <oasis:entry colname="col5">0.770</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M183" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.020</oasis:entry>  
         <oasis:entry colname="col7">0.865</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">04 – Biggses</oasis:entry>  
         <oasis:entry colname="col2">0.097</oasis:entry>  
         <oasis:entry colname="col3">0.242</oasis:entry>  
         <oasis:entry colname="col4">0.153</oasis:entry>  
         <oasis:entry colname="col5">0.891</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M184" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.002</oasis:entry>  
         <oasis:entry colname="col7">0.964</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">41 – Front</oasis:entry>  
         <oasis:entry colname="col2">0.095</oasis:entry>  
         <oasis:entry colname="col3">0.193</oasis:entry>  
         <oasis:entry colname="col4">0.127</oasis:entry>  
         <oasis:entry colname="col5">0.620</oasis:entry>  
         <oasis:entry colname="col6">0.023</oasis:entry>  
         <oasis:entry colname="col7">0.985</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">03 – Perns</oasis:entry>  
         <oasis:entry colname="col2">0.076</oasis:entry>  
         <oasis:entry colname="col3">0.213</oasis:entry>  
         <oasis:entry colname="col4">0.135</oasis:entry>  
         <oasis:entry colname="col5">0.827</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M185" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.013</oasis:entry>  
         <oasis:entry colname="col7">0.945</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">45 – Dip</oasis:entry>  
         <oasis:entry colname="col2">0.095</oasis:entry>  
         <oasis:entry colname="col3">0.213</oasis:entry>  
         <oasis:entry colname="col4">0.135</oasis:entry>  
         <oasis:entry colname="col5">0.734</oasis:entry>  
         <oasis:entry colname="col6">0.011</oasis:entry>  
         <oasis:entry colname="col7">0.982</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">06 – Langs</oasis:entry>  
         <oasis:entry colname="col2">0.091</oasis:entry>  
         <oasis:entry colname="col3">0.290</oasis:entry>  
         <oasis:entry colname="col4">0.125</oasis:entry>  
         <oasis:entry colname="col5">1.316</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M186" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.076</oasis:entry>  
         <oasis:entry colname="col7">0.998</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">07 – Spittles</oasis:entry>  
         <oasis:entry colname="col2">0.094</oasis:entry>  
         <oasis:entry colname="col3">0.275</oasis:entry>  
         <oasis:entry colname="col4">0.119</oasis:entry>  
         <oasis:entry colname="col5">1.216</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M187" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.063</oasis:entry>  
         <oasis:entry colname="col7">0.993</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">05 – Rogers</oasis:entry>  
         <oasis:entry colname="col2">0.084</oasis:entry>  
         <oasis:entry colname="col3">0.224</oasis:entry>  
         <oasis:entry colname="col4">0.121</oasis:entry>  
         <oasis:entry colname="col5">0.896</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M188" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.024</oasis:entry>  
         <oasis:entry colname="col7">0.997</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">19 – Clovers East</oasis:entry>  
         <oasis:entry colname="col2">0.095</oasis:entry>  
         <oasis:entry colname="col3">0.274</oasis:entry>  
         <oasis:entry colname="col4">0.170</oasis:entry>  
         <oasis:entry colname="col5">1.093</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M189" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.024</oasis:entry>  
         <oasis:entry colname="col7">0.951</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">10 – Caldoes</oasis:entry>  
         <oasis:entry colname="col2">0.081</oasis:entry>  
         <oasis:entry colname="col3">0.205</oasis:entry>  
         <oasis:entry colname="col4">0.129</oasis:entry>  
         <oasis:entry colname="col5">0.758</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M190" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.003</oasis:entry>  
         <oasis:entry colname="col7">0.965</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">12 – North McKenzies</oasis:entry>  
         <oasis:entry colname="col2">0.089</oasis:entry>  
         <oasis:entry colname="col3">0.269</oasis:entry>  
         <oasis:entry colname="col4">0.140</oasis:entry>  
         <oasis:entry colname="col5">1.149</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M191" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.048</oasis:entry>  
         <oasis:entry colname="col7">0.995</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">27 – Jack Shehans</oasis:entry>  
         <oasis:entry colname="col2">0.083</oasis:entry>  
         <oasis:entry colname="col3">0.216</oasis:entry>  
         <oasis:entry colname="col4">0.135</oasis:entry>  
         <oasis:entry colname="col5">0.818</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M192" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.007</oasis:entry>  
         <oasis:entry colname="col7">0.966</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">42 – Warne</oasis:entry>  
         <oasis:entry colname="col2">0.066</oasis:entry>  
         <oasis:entry colname="col3">0.189</oasis:entry>  
         <oasis:entry colname="col4">0.089</oasis:entry>  
         <oasis:entry colname="col5">0.807</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M193" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.035</oasis:entry>  
         <oasis:entry colname="col7">0.999</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">44 – Windmill</oasis:entry>  
         <oasis:entry colname="col2">0.077</oasis:entry>  
         <oasis:entry colname="col3">0.220</oasis:entry>  
         <oasis:entry colname="col4">0.147</oasis:entry>  
         <oasis:entry colname="col5">0.848</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M194" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.010</oasis:entry>  
         <oasis:entry colname="col7">0.911</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">43 – Top</oasis:entry>  
         <oasis:entry colname="col2">0.074</oasis:entry>  
         <oasis:entry colname="col3">0.206</oasis:entry>  
         <oasis:entry colname="col4">0.093</oasis:entry>  
         <oasis:entry colname="col5">0.883</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M195" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.040</oasis:entry>  
         <oasis:entry colname="col7">0.995</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">37 – Barrell</oasis:entry>  
         <oasis:entry colname="col2">0.095</oasis:entry>  
         <oasis:entry colname="col3">0.206</oasis:entry>  
         <oasis:entry colname="col4">0.129</oasis:entry>  
         <oasis:entry colname="col5">0.701</oasis:entry>  
         <oasis:entry colname="col6">0.013</oasis:entry>  
         <oasis:entry colname="col7">0.991</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">48 – Vernies</oasis:entry>  
         <oasis:entry colname="col2">0.082</oasis:entry>  
         <oasis:entry colname="col3">0.200</oasis:entry>  
         <oasis:entry colname="col4">0.103</oasis:entry>  
         <oasis:entry colname="col5">0.781</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M196" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.017</oasis:entry>  
         <oasis:entry colname="col7">0.999</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">20 – Clovers South</oasis:entry>  
         <oasis:entry colname="col2">0.086</oasis:entry>  
         <oasis:entry colname="col3">0.221</oasis:entry>  
         <oasis:entry colname="col4">0.139</oasis:entry>  
         <oasis:entry colname="col5">0.830</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M197" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.006</oasis:entry>  
         <oasis:entry colname="col7">0.963</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">33 – Near West</oasis:entry>  
         <oasis:entry colname="col2">0.067</oasis:entry>  
         <oasis:entry colname="col3">0.206</oasis:entry>  
         <oasis:entry colname="col4">0.106</oasis:entry>  
         <oasis:entry colname="col5">0.889</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M198" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.039</oasis:entry>  
         <oasis:entry colname="col7">0.995</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">31 – Back Jack Shehans</oasis:entry>  
         <oasis:entry colname="col2">0.070</oasis:entry>  
         <oasis:entry colname="col3">0.215</oasis:entry>  
         <oasis:entry colname="col4">0.125</oasis:entry>  
         <oasis:entry colname="col5">0.896</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M199" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.030</oasis:entry>  
         <oasis:entry colname="col7">0.969</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">28 – Clovers West</oasis:entry>  
         <oasis:entry colname="col2">0.093</oasis:entry>  
         <oasis:entry colname="col3">0.260</oasis:entry>  
         <oasis:entry colname="col4">0.166</oasis:entry>  
         <oasis:entry colname="col5">1.004</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M200" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.014</oasis:entry>  
         <oasis:entry colname="col7">0.940</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">39 – Crossroads</oasis:entry>  
         <oasis:entry colname="col2">0.077</oasis:entry>  
         <oasis:entry colname="col3">0.214</oasis:entry>  
         <oasis:entry colname="col4">0.126</oasis:entry>  
         <oasis:entry colname="col5">0.855</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M201" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.020</oasis:entry>  
         <oasis:entry colname="col7">0.977</oasis:entry>
       </oasis:row>
       <oasis:row>  
         <oasis:entry colname="col1">53 – Clovers North</oasis:entry>  
         <oasis:entry colname="col2">0.079</oasis:entry>  
         <oasis:entry colname="col3">0.229</oasis:entry>  
         <oasis:entry colname="col4">0.151</oasis:entry>  
         <oasis:entry colname="col5">0.893</oasis:entry>  
         <oasis:entry colname="col6"><inline-formula><mml:math id="M202" display="inline"><mml:mo>-</mml:mo></mml:math></inline-formula>0.013</oasis:entry>  
         <oasis:entry colname="col7">0.917</oasis:entry>
       </oasis:row>
     </oasis:tbody>
   </oasis:tgroup></oasis:table></table-wrap>

<?xmltex \hack{\clearpage}?>
</app>
  </app-group><notes notes-type="competinginterests">

      <p id="d1e4128">The authors declare that they have no conflict of
interest.</p>
  </notes><ack><title>Acknowledgements</title><p id="d1e4134">The authors acknowledge the cooperation of Tim McClelland and family who
allowed access to their properties for installations and surveys. We are
grateful to staff from the Birchip Cropping Group who helped with surveys and
sample analysis. Two anonymous reviewers, Christian Massari, Roland Baatz and Auro Almeida are
thanked for their valuable review comments. Funding for this research was
provided by the Department of Agriculture &amp; Water (grant agreement
GMS-2582) and CSIRO. We acknowledge the NMDB database
(<uri>http://www.nmdb.eu</uri>), founded under the European Union's FP7 programme
(contract no. 213007) for providing neutron monitor data. Lomnický
štít neutron monitor data (LMKS) were kindly provided by the
Department of Space Physics, Institute of Experimental Physics, Košice,
Slovakia. AWRA-L soil moisture estimates were provided by the Australian
Bureau of Meteorology landscape water balance modelling program
(<uri>http://www.bom.gov.au/water/landscape</uri>).<?xmltex \hack{\newline}?><?xmltex \hack{\newline}?>
Edited by: Nunzio Romano<?xmltex \hack{\newline}?>
Reviewed by: Roland Baatz, Christian Massari, and two anonymous referees</p></ack><ref-list>
    <title>References</title>

      <ref id="bib1.bib1"><label>1</label><mixed-citation>Andreasen, M., Jensen, K. H., Desilets, D., Franz, T. E., Zreda, M., Bogena,
H. R., and Looms, M. C.: Status and perspectives of the cosmic-ray neutron
method for soil moisture estimation and other environmental science
applications, Vadose Zone J., 16, <ext-link xlink:href="https://doi.org/10.2136/vzj2017.04.0086" ext-link-type="DOI">10.2136/vzj2017.04.0086</ext-link>,
2017a.</mixed-citation></ref>
      <ref id="bib1.bib2"><label>2</label><mixed-citation>Andreasen, M., Jensen, K. H., Desilets, D., Zreda, M., Bogena, H. R., and
Looms, M. C.: Cosmic-ray neutron transport at a forest field site: the
sensitivity to various environmental conditions with focus on biomass and
canopy interception, Hydrol. Earth Syst. Sci., 21, 1875–1894,
<ext-link xlink:href="https://doi.org/10.5194/hess-21-1875-2017" ext-link-type="DOI">10.5194/hess-21-1875-2017</ext-link>, 2017b.</mixed-citation></ref>
      <ref id="bib1.bib3"><label>3</label><mixed-citation>Anwar, M. R., O'Leary, G., McNeil, D., Hossain, H., and Nelson, R.: Climate
change impact on rainfed wheat in south-eastern Australia, Field Crop. Res.,
104, 139–147, <ext-link xlink:href="https://doi.org/10.1016/j.fcr.2007.03.020" ext-link-type="DOI">10.1016/j.fcr.2007.03.020</ext-link>, 2007.</mixed-citation></ref>
      <ref id="bib1.bib4"><label>4</label><mixed-citation>Avery, W. A., Finkenbiner, C., Franz, T. E., Wang, T., Nguy-Robertson, A. L.,
Suyker, A., Arkebauer, T., and Muñoz-Arriola, F.: Incorporation of
globally available datasets into the roving cosmic-ray neutron probe method
for estimating field-scale soil water content, Hydrol. Earth Syst. Sci., 20,
3859–3872, <ext-link xlink:href="https://doi.org/10.5194/hess-20-3859-2016" ext-link-type="DOI">10.5194/hess-20-3859-2016</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib5"><label>5</label><mixed-citation>Baatz, R., Bogena, H. R., Hendricks Franssen, H. J., Huisman, J. A., Qu, W.,
Montzka, C., and Vereecken, H.: Calibration of a catchment scale cosmic-ray
probe network: A comparison of three parameterization methods, J. Hydrol.,
516, 231–244, <ext-link xlink:href="https://doi.org/10.1016/j.jhydrol.2014.02.026" ext-link-type="DOI">10.1016/j.jhydrol.2014.02.026</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib6"><label>6</label><mixed-citation>Baatz, R., Bogena, H. R., Hendricks Franssen, H. J., Huisman, J. A., Montzka,
C., and Vereecken, H.: An empirical vegetation correction for soil water
content quantification using cosmic ray probes, Water Resour. Res.,
2030–2046, <ext-link xlink:href="https://doi.org/10.1002/2014wr016443" ext-link-type="DOI">10.1002/2014wr016443</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib7"><label>7</label><mixed-citation>Baatz, R., Hendricks Franssen, H.-J., Han, X., Hoar, T., Bogena, H. R., and
Vereecken, H.: Evaluation of a cosmic-ray neutron sensor network for improved
land surface model prediction, Hydrol. Earth Syst. Sci., 21, 2509–2530,
<ext-link xlink:href="https://doi.org/10.5194/hess-21-2509-2017" ext-link-type="DOI">10.5194/hess-21-2509-2017</ext-link>, 2017.</mixed-citation></ref>
      <ref id="bib1.bib8"><label>8</label><mixed-citation>Bogena, H. R., Herbst, M., Huisman, J. A., Rosenbaum, U., Weuthen, A., and
Vereecken, H.: Potential of Wireless Sensor Networks for Measuring Soil Water
Content Variability All rights reserved. No part of this periodical may be
reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or any information storage and
retrieval system, without permission in writing from the publisher, Vadose
Zone J., 9, 1002–1013, <ext-link xlink:href="https://doi.org/10.2136/vzj2009.0173" ext-link-type="DOI">10.2136/vzj2009.0173</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bib9"><label>9</label><mixed-citation>Bogena, H. R., Huisman, J. A., Baatz, R., Hendricks Franssen, H. J., and
Vereecken, H.: Accuracy of the cosmic-ray soil water content probe in humid
forest ecosystems: The worst case scenario, Water Resour. Res., 49,
5778–5791, <ext-link xlink:href="https://doi.org/10.1002/wrcr.20463" ext-link-type="DOI">10.1002/wrcr.20463</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib10"><label>10</label><mixed-citation>Chrisman, B. and Zreda, M.: Quantifying mesoscale soil moisture with the
cosmic-ray rover, Hydrol. Earth Syst. Sci., 17, 5097–5108,
<ext-link xlink:href="https://doi.org/10.5194/hess-17-5097-2013" ext-link-type="DOI">10.5194/hess-17-5097-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib11"><label>11</label><mixed-citation>Desilets, D. and Zreda, M.: Spatial and temporal distribution of secondary
cosmic-ray nucleon intensities and applications to in situ cosmogenic dating,
Earth Planet. Sc. Lett., 206, 21–42, <ext-link xlink:href="https://doi.org/10.1016/s0012-821x(02)01088-9" ext-link-type="DOI">10.1016/s0012-821x(02)01088-9</ext-link>,
2003.</mixed-citation></ref>
      <ref id="bib1.bib12"><label>12</label><mixed-citation>Desilets, D. and Zreda, M.: Footprint diameter for a cosmic-ray soil moisture
probe: Theory and Monte Carlo simulations, Water Resour. Res., 49,
3566–3575, <ext-link xlink:href="https://doi.org/10.1002/wrcr.20187" ext-link-type="DOI">10.1002/wrcr.20187</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib13"><label>13</label><mixed-citation>Desilets, D., Zreda, M., and Prabu, T.: Extended scaling factors for in situ
cosmogenic nuclides: New measurements at low latitude, Earth Planet. Sc.
Lett., 246, 265–276, <ext-link xlink:href="https://doi.org/10.1016/j.epsl.2006.03.051" ext-link-type="DOI">10.1016/j.epsl.2006.03.051</ext-link>, 2006.</mixed-citation></ref>
      <ref id="bib1.bib14"><label>14</label><mixed-citation>Desilets, D., Zreda, M., and Ferre, T. P. A.: Nature's neutron probe: Land
surface hydrology at an elusive scale with cosmic rays, Water Resour. Res.,
46, W11505, <ext-link xlink:href="https://doi.org/10.1029/2009wr008726" ext-link-type="DOI">10.1029/2009wr008726</ext-link>, 2010.</mixed-citation></ref>
      <ref id="bib1.bib15"><label>15</label><mixed-citation>Dong, J., Ochsner, T. E., Zreda, M., Cosh, M. H., and Zou, C. B.: Calibration
and Validation of the COSMOS Rover for Surface Soil Moisture Measurement,
Vadose Zone J., 13, <ext-link xlink:href="https://doi.org/10.2136/vzj2013.08.0148" ext-link-type="DOI">10.2136/vzj2013.08.0148</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib16"><label>16</label><mixed-citation>Evans, J. G., Ward, H. C., Blake, J. R., Hewitt, E. J., Morrison, R., Fry,
M., Ball, L. A., Doughty, L. C., Libre, J. W., Hitt, O. E., Rylett, D.,
Ellis, R. J., Warwick, A. C., Brooks, M., Parkes, M. A., Wright, G. M. H.,
Singer, A. C., Boorman, D. B., and Jenkins, A.: Soil water content in
southern England derived from a cosmic-ray soil moisture observing system –
COSMOS-UK, Hydrol. Process., 30, 4987–4999, <ext-link xlink:href="https://doi.org/10.1002/hyp.10929" ext-link-type="DOI">10.1002/hyp.10929</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib17"><label>17</label><mixed-citation>Franz, T. E., Zreda, M., Ferre, T. P. A., Rosolem, R., Zweck, C., Stillman,
S., Zeng, X., and Shuttleworth, W. J.: Measurement depth of the cosmic ray
soil moisture probe affected by hydrogen from various sources, Water Resour.
Res., 48, W08515, <ext-link xlink:href="https://doi.org/10.1029/2012wr011871" ext-link-type="DOI">10.1029/2012wr011871</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib18"><label>18</label><mixed-citation>Franz, T. E., Zreda, M., Rosolem, R., and Ferre, T. P. A.: A universal
calibration function for determination of soil moisture with cosmic-ray
neutrons, Hydrol. Earth Syst. Sci., 17, 453–460,
<ext-link xlink:href="https://doi.org/10.5194/hess-17-453-2013" ext-link-type="DOI">10.5194/hess-17-453-2013</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib19"><label>19</label><mixed-citation>Franz, T. E., Wang, T., Avery, W., Finkenbiner, C., and Brocca, L.: Combined
analysis of soil moisture measurements from roving and fixed cosmic ray
neutron probes for multiscale real-time monitoring, Geophys. Res. Lett.,
1–8, <ext-link xlink:href="https://doi.org/10.1002/2015gl063963" ext-link-type="DOI">10.1002/2015gl063963</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib20"><label>20</label><mixed-citation>
Grayson, R. B. and Western, A. W.: Towards areal estimation of soil water
content from point measurements: time and space stability of mean response,
J. Hydrol., 207, 68–82, 1998.</mixed-citation></ref>
      <ref id="bib1.bib21"><label>21</label><mixed-citation>
Greacen, E. L. (Ed.): Soil water assessment by the neutron method, in: Soil
water assessment by the neutron method, CSIRO Australia, Adelaide, 1981.</mixed-citation></ref>
      <ref id="bib1.bib22"><label>22</label><mixed-citation>Hawdon, A., McJannet, D., and Wallace, J.: Calibration and correction
procedures for cosmic-ray neutron soil moisture probes located across
Australia, Water Resour. Res., 50, 5029–5043, <ext-link xlink:href="https://doi.org/10.1002/2013wr015138" ext-link-type="DOI">10.1002/2013wr015138</ext-link>,
2014.</mixed-citation></ref>
      <ref id="bib1.bib23"><label>23</label><mixed-citation>Holgate, C. M., De Jeu, R. A. M., van Dijk, A. I. J. M., Liu, Y. Y.,
Renzullo, L. J., Vinodkumar, Dharssi, I., Parinussa, R. M., Van Der Schalie,
R., Gevaert, A., Walker, J., McJannet, D., Cleverly, J., Haverd, V.,
Trudinger, C. M., and Briggs, P. R.: Comparison of remotely sensed and
modelled soil moisture data sets across Australia, Remote Sens. Environ.,
186, 479–500, <ext-link xlink:href="https://doi.org/10.1016/j.rse.2016.09.015" ext-link-type="DOI">10.1016/j.rse.2016.09.015</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib24"><label>24</label><mixed-citation>
Kachanoski, R. and Jong, E.: Scale dependence and the temporal persistence of
spatial patterns of soil water storage, Water Resour. Res., 24, 85–91, 1988.</mixed-citation></ref>
      <ref id="bib1.bib25"><label>25</label><mixed-citation>Kędzior, M. and Zawadzki, J.: Comparative study of soil moisture
estimations from SMOS satellite mission, GLDAS database, and cosmic-ray
neutrons measurements at COSMOS station in Eastern Poland, Geoderma, 283,
21–31, <ext-link xlink:href="https://doi.org/10.1016/j.geoderma.2016.07.023" ext-link-type="DOI">10.1016/j.geoderma.2016.07.023</ext-link>, 2016.</mixed-citation></ref>
      <ref id="bib1.bib26"><label>26</label><mixed-citation>
Klute, A.: Methods of soil analysis. Part 1. Physical and mineralogical
methods, American Society of Agronomy, Inc., 1986.</mixed-citation></ref>
      <ref id="bib1.bib27"><label>27</label><mixed-citation>Köhli, M., Schrön, M., Zreda, M., Schmidt, U., Dietrich, P., and
Zacharias, S.: Footprint characteristics revised for field-scale soil
moisture monitoring with cosmic-ray neutrons, Water Resour. Res., 51,
5772–5790, <ext-link xlink:href="https://doi.org/10.1002/2015wr017169" ext-link-type="DOI">10.1002/2015wr017169</ext-link>, 2015.</mixed-citation></ref>
      <ref id="bib1.bib28"><label>28</label><mixed-citation>McJannet, D., Franz, T., Hawdon, A., Boadle, D., Baker, B., Almeida, A.,
Silberstein, R., Lambert, T., and Desilets, D.: Field testing of the
universal calibration function for determination of soil moisture with
cosmic-ray neutrons, Water Resour. Res., 50, 5235–5248,
<ext-link xlink:href="https://doi.org/10.1002/2014wr015513" ext-link-type="DOI">10.1002/2014wr015513</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib29"><label>29</label><mixed-citation>
Minasny, B., McBratney, A. B., and Whelan, B. M.: VESPER version 1.62, The
University of Sydney, NSW 2006, Australian Centre for Precision Agriculture,
2005.</mixed-citation></ref>
      <ref id="bib1.bib30"><label>30</label><mixed-citation>Montzka, C., Bogena, H., Zreda, M., Monerris, A., Morrison, R., Muddu, S.,
and Vereecken, H.: Validation of Spaceborne and Modelled Surface Soil
Moisture Products with Cosmic-Ray Neutron Probes, Remote Sens., 9, 103,
<ext-link xlink:href="https://doi.org/10.3390/rs9020103" ext-link-type="DOI">10.3390/rs9020103</ext-link>,
2017.</mixed-citation></ref>
      <ref id="bib1.bib31"><label>31</label><mixed-citation>
NASA: US standard atmosphere, 1976, NOAA-S/T, Washington D.C., 1976.</mixed-citation></ref>
      <ref id="bib1.bib32"><label>32</label><mixed-citation>Ochsner, T. E., Cosh, M. H., Cuenca, R. H., Dorigo, W. A., Draper, C. S.,
Hagimoto, Y., Kerr, Y. H., Njoku, E. G., Small, E. E., and Zreda, M.: State
of the Art in Large-Scale Soil Moisture Monitoring, Soil Sci. Soc. Am. J.,
77, 1888–1919, <ext-link xlink:href="https://doi.org/10.2136/sssaj2013.03.0093" ext-link-type="DOI">10.2136/sssaj2013.03.0093</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib33"><label>33</label><mixed-citation>
Rayment, G. E. and Higginson, F. R.: Australian laboratory handbook of soil
and water chemical methods, Inkata Press Pty Ltd, 1992.</mixed-citation></ref>
      <ref id="bib1.bib34"><label>34</label><mixed-citation>Renzullo, L. J., van Dijk, A. I. J. M., Perraud, J. M., Collins, D.,
Henderson, B., Jin, H., Smith, A. B., and McJannet, D. L.: Continental
satellite soil moisture data assimilation improves root-zone moisture
analysis for water resources assessment, J. Hydrol., 519, 3338–3352,
<?xmltex \hack{\\}?>doi10.1016/j.jhydrol.2014.08.008, 2014.</mixed-citation></ref>
      <ref id="bib1.bib35"><label>35</label><mixed-citation>Rivera Villarreyes, C. A., Baroni, G., and Oswald, S. E.: Inverse modelling
of cosmic-ray soil moisture for field-scale soil hydraulic parameters, Eur.
J. Soil Sci., 65, 876–886, <ext-link xlink:href="https://doi.org/10.1111/ejss.12162" ext-link-type="DOI">10.1111/ejss.12162</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib36"><label>36</label><mixed-citation>Rosolem, R., Shuttleworth, W. J., Zreda, M., Franz, T. E., Zeng, X., and
Kurc, S. A.: The Effect of Atmospheric Water Vapor on Neutron Count in the
Cosmic-Ray Soil Moisture Observing System, J. Hydrometeorol., 14, 1659–1671,
<ext-link xlink:href="https://doi.org/10.1175/jhm-d-12-0120.1" ext-link-type="DOI">10.1175/jhm-d-12-0120.1</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib37"><label>37</label><mixed-citation>
Schrön, M., Rosolem, R., Köhli, M., Piussi, L., Schröter, I.,
Iwema, J., Kögler, S., Oswald, S., Wollschläger, U., and Samaniego,
L.: The Cosmic-Ray Neutron Rover-Mobile Surveys of Field Soil Moisture and
the Influence of Roads, Water Resour. Res., in review, 2017.</mixed-citation></ref>
      <ref id="bib1.bib38"><label>38</label><mixed-citation>Smith, A. B., Walker, J. P., Western, A. W., Young, R. I., Ellett, K. M.,
Pipunic, R. C., Grayson, R. B., Siriwardena, L., Chiew, F. H. S., and
Richter, H.: The Murrumbidgee soil moisture monitoring network data set,
Water Resour. Res., 48, W07701, <ext-link xlink:href="https://doi.org/10.1029/2012WR011976" ext-link-type="DOI">10.1029/2012WR011976</ext-link>, 2012.</mixed-citation></ref>
      <ref id="bib1.bib39"><label>39</label><mixed-citation>
Vachaud, G., Passerat de Silans, A., Balabanis, P., and Vauclin, M.: Temporal
stability of spatially measured soil water probability density function, Soil
Sci. Soc. Am. J., 49, 822–828, 1985.</mixed-citation></ref>
      <ref id="bib1.bib40"><label>40</label><mixed-citation>
Van Dijk, A.: The Australian water resources assessment system, Technical Report 4, CSIRO, Canberra, 108 pp.,
2010.</mixed-citation></ref>
      <ref id="bib1.bib41"><label>41</label><mixed-citation>Vereecken, H., Huisman, J. A., Pachepsky, Y., Montzka, C., van der Kruk, J.,
Bogena, H., Weihermüller, L., Herbst, M., Martinez, G., and Vanderborght,
J.: On the spatio-temporal dynamics of soil moisture at the field scale, J.
Hydrol., 516, 76–96, <ext-link xlink:href="https://doi.org/10.1016/j.jhydrol.2013.11.061" ext-link-type="DOI">10.1016/j.jhydrol.2013.11.061</ext-link>, 2014.</mixed-citation></ref>
      <ref id="bib1.bib42"><label>42</label><mixed-citation>
Viney, N., Vaze, J., Crosbie, R., Wang, B., Dawes, W., and Frost, A.: AWRA-L v4. 5:
technical description of model algorithms and inputs, CSIRO, Australia, 2014.</mixed-citation></ref>
      <ref id="bib1.bib43"><label>43</label><mixed-citation>Vinodkumar Dharssi, I., Bally, J., Steinle, P., McJannet, D., and Walker, J.:
Comparison of soil wetness from multiple models over Australia with
observations, Water Resour. Res., 53, 633–646, <ext-link xlink:href="https://doi.org/10.1002/2015wr017738" ext-link-type="DOI">10.1002/2015wr017738</ext-link>,
2017.</mixed-citation></ref>
      <ref id="bib1.bib44"><label>44</label><mixed-citation>Viscarra Rossel, R., Chen, C., Grundy, M., Searle, R., Clifford, D., Odgers,
N., Holmes, K., Griffin, T., Liddicoat, C., and Kidd, D.: Soil and Landscape
Grid National Soil Attribute Maps – Bulk Density – Whole Earth (3<inline-formula><mml:math id="M203" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula>
resolution) – Release 1. v4, CSIRO Data Collection,
<ext-link xlink:href="https://doi.org/10.4225/08/546EE212B0048" ext-link-type="DOI">10.4225/08/546EE212B0048</ext-link>, 2014a.</mixed-citation></ref>
      <ref id="bib1.bib45"><label>45</label><mixed-citation>Viscarra Rossel, R., Chen, C., Grundy, M., Searle, R., Clifford, D., Odgers,
N., Holmes, K., Griffin, T., Liddicoat, C., and Kidd, D.: Soil and Landscape
Grid National Soil Attribute Maps – Organic Carbon (3<inline-formula><mml:math id="M204" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> resolution) –
Release 1. v1., CSIRO Data Collection, <ext-link xlink:href="https://doi.org/10.4225/08/547523BB0801A" ext-link-type="DOI">10.4225/08/547523BB0801A</ext-link>, 2014b.</mixed-citation></ref>
      <ref id="bib1.bib46"><label>46</label><mixed-citation>Viscarra Rossel, R., Chen, C., Grundy, M., Searle, R., Clifford, D., Odgers,
N., Holmes, K., Griffin, T., Liddicoat, C., and Kidd, D.: Soil and Landscape
Grid National Soil Attribute Maps – Clay (3<inline-formula><mml:math id="M205" display="inline"><mml:msup><mml:mi/><mml:mrow><mml:mo>′</mml:mo><mml:mo>′</mml:mo></mml:mrow></mml:msup></mml:math></inline-formula> resolution) – Release 1.
v4, CSIRO Data Collection, <ext-link xlink:href="https://doi.org/10.4225/08/546EEE35164BF" ext-link-type="DOI">10.4225/08/546EEE35164BF</ext-link>, 2014c.</mixed-citation></ref>
      <ref id="bib1.bib47"><label>47</label><mixed-citation>Wallace, J., Macfarlane, C., McJannet, D., Ellis, T., Grigg, A., and Dijk, A.
v.: Evaluation of forest interception estimation in the continental scale
Australian Water Resources Assessment – Landscape (AWRA-L) model, J.
Hydrol., 499, 210–223, <ext-link xlink:href="https://doi.org/10.1016/j.jhydrol.2013.06.036" ext-link-type="DOI">10.1016/j.jhydrol.2013.06.036</ext-link>, 2013.</mixed-citation></ref>
      <ref id="bib1.bib48"><label>48</label><mixed-citation>Western, A. W. and Blöschl, G.: On the spatial scaling of soil moisture,
J. Hydrol., 217, 203–224, <ext-link xlink:href="https://doi.org/10.1016/S0022-1694(98)00232-7" ext-link-type="DOI">10.1016/S0022-1694(98)00232-7</ext-link>, 1999.</mixed-citation></ref>
      <ref id="bib1.bib49"><label>49</label><mixed-citation>Yang, L. and Kaleita, A. L.: Understanding Spatio-temporal Patterns of Soil
Moisture at the Field Scale, American Society of Agricultural and Biological Engineers Annual International Meeting,
Minneapolis, USA, 17–20 June 2007, ASABE Paper No. 072108, 2007.
 </mixed-citation></ref><?xmltex \hack{\newpage}?>
      <ref id="bib1.bib50"><label>50</label><mixed-citation>Zreda, M., Desilets, D., Ferre, T. P. A., and Scott, R. L.: Measuring soil
moisture content non-invasively at intermediate spatial scale using
cosmic-ray neutrons, Geophys. Res. Lett., 35, L21402,
<ext-link xlink:href="https://doi.org/10.1029/2008gl035655" ext-link-type="DOI">10.1029/2008gl035655</ext-link>, 2008.</mixed-citation></ref>
      <ref id="bib1.bib51"><label>51</label><mixed-citation>Zreda, M., Shuttleworth, W. J., Zeng, X., Zweck, C., Desilets, D., Franz, T.,
and Rosolem, R.: COSMOS: the COsmic-ray Soil Moisture Observing System,
Hydrol. Earth Syst. Sci., 16, 4079–4099,
<ext-link xlink:href="https://doi.org/10.5194/hess-16-4079-2012" ext-link-type="DOI">10.5194/hess-16-4079-2012</ext-link>, 2012.</mixed-citation></ref>

  </ref-list><app-group content-type="float"><app><title/>

    </app></app-group></back>
    <!--<article-title-html>Multiscale soil moisture estimates using static and roving cosmic-ray soil moisture sensors</article-title-html>
<abstract-html><p class="p">Soil moisture plays a critical role in land surface processes and as such
there has been a recent increase in the number and resolution of satellite
soil moisture observations and the development of land surface process models
with ever increasing resolution. Despite these developments, validation and
calibration of these products has been limited because of a lack of
observations on corresponding scales. A recently developed mobile soil
moisture monitoring platform, known as the <q>rover</q>, offers opportunities to
overcome this scale issue. This paper describes methods, results and testing
of soil moisture estimates produced using rover surveys on a range of scales
that are commensurate with model and satellite retrievals. Our investigation
involved static cosmic-ray neutron sensors and rover surveys across both
broad (36  ×  36 km at 9 km resolution) and intensive
(10  ×  10 km at 1 km resolution) scales in a cropping district in
the Mallee region of Victoria, Australia. We describe approaches for
converting rover survey neutron counts to soil moisture and discuss the
factors controlling soil moisture variability. We use independent gravimetric
and modelled soil moisture estimates collected across both space and time to
validate rover soil moisture products. Measurements revealed that temporal
patterns in soil moisture were preserved through time and regression
modelling approaches were utilised to produce time series of property-scale
soil moisture which may also have applications in calibration and validation
studies or local farm management. Intensive-scale rover surveys produced
reliable soil moisture estimates at 1 km resolution while broad-scale
surveys produced soil moisture estimates at 9 km resolution. We conclude
that the multiscale soil moisture products produced in this study are well
suited to future analysis of satellite soil moisture retrievals and finer-scale soil moisture models.</p></abstract-html>
<ref-html id="bib1.bib1"><label>1</label><mixed-citation>
Andreasen, M., Jensen, K. H., Desilets, D., Franz, T. E., Zreda, M., Bogena,
H. R., and Looms, M. C.: Status and perspectives of the cosmic-ray neutron
method for soil moisture estimation and other environmental science
applications, Vadose Zone J., 16, <a href="https://doi.org/10.2136/vzj2017.04.0086" target="_blank">https://doi.org/10.2136/vzj2017.04.0086</a>,
2017a.
</mixed-citation></ref-html>
<ref-html id="bib1.bib2"><label>2</label><mixed-citation>
Andreasen, M., Jensen, K. H., Desilets, D., Zreda, M., Bogena, H. R., and
Looms, M. C.: Cosmic-ray neutron transport at a forest field site: the
sensitivity to various environmental conditions with focus on biomass and
canopy interception, Hydrol. Earth Syst. Sci., 21, 1875–1894,
<a href="https://doi.org/10.5194/hess-21-1875-2017" target="_blank">https://doi.org/10.5194/hess-21-1875-2017</a>, 2017b.
</mixed-citation></ref-html>
<ref-html id="bib1.bib3"><label>3</label><mixed-citation>
Anwar, M. R., O'Leary, G., McNeil, D., Hossain, H., and Nelson, R.: Climate
change impact on rainfed wheat in south-eastern Australia, Field Crop. Res.,
104, 139–147, <a href="https://doi.org/10.1016/j.fcr.2007.03.020" target="_blank">https://doi.org/10.1016/j.fcr.2007.03.020</a>, 2007.
</mixed-citation></ref-html>
<ref-html id="bib1.bib4"><label>4</label><mixed-citation>
Avery, W. A., Finkenbiner, C., Franz, T. E., Wang, T., Nguy-Robertson, A. L.,
Suyker, A., Arkebauer, T., and Muñoz-Arriola, F.: Incorporation of
globally available datasets into the roving cosmic-ray neutron probe method
for estimating field-scale soil water content, Hydrol. Earth Syst. Sci., 20,
3859–3872, <a href="https://doi.org/10.5194/hess-20-3859-2016" target="_blank">https://doi.org/10.5194/hess-20-3859-2016</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib5"><label>5</label><mixed-citation>
Baatz, R., Bogena, H. R., Hendricks Franssen, H. J., Huisman, J. A., Qu, W.,
Montzka, C., and Vereecken, H.: Calibration of a catchment scale cosmic-ray
probe network: A comparison of three parameterization methods, J. Hydrol.,
516, 231–244, <a href="https://doi.org/10.1016/j.jhydrol.2014.02.026" target="_blank">https://doi.org/10.1016/j.jhydrol.2014.02.026</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib6"><label>6</label><mixed-citation>
Baatz, R., Bogena, H. R., Hendricks Franssen, H. J., Huisman, J. A., Montzka,
C., and Vereecken, H.: An empirical vegetation correction for soil water
content quantification using cosmic ray probes, Water Resour. Res.,
2030–2046, <a href="https://doi.org/10.1002/2014wr016443" target="_blank">https://doi.org/10.1002/2014wr016443</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib7"><label>7</label><mixed-citation>
Baatz, R., Hendricks Franssen, H.-J., Han, X., Hoar, T., Bogena, H. R., and
Vereecken, H.: Evaluation of a cosmic-ray neutron sensor network for improved
land surface model prediction, Hydrol. Earth Syst. Sci., 21, 2509–2530,
<a href="https://doi.org/10.5194/hess-21-2509-2017" target="_blank">https://doi.org/10.5194/hess-21-2509-2017</a>, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib8"><label>8</label><mixed-citation>
Bogena, H. R., Herbst, M., Huisman, J. A., Rosenbaum, U., Weuthen, A., and
Vereecken, H.: Potential of Wireless Sensor Networks for Measuring Soil Water
Content Variability All rights reserved. No part of this periodical may be
reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or any information storage and
retrieval system, without permission in writing from the publisher, Vadose
Zone J., 9, 1002–1013, <a href="https://doi.org/10.2136/vzj2009.0173" target="_blank">https://doi.org/10.2136/vzj2009.0173</a>, 2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib9"><label>9</label><mixed-citation>
Bogena, H. R., Huisman, J. A., Baatz, R., Hendricks Franssen, H. J., and
Vereecken, H.: Accuracy of the cosmic-ray soil water content probe in humid
forest ecosystems: The worst case scenario, Water Resour. Res., 49,
5778–5791, <a href="https://doi.org/10.1002/wrcr.20463" target="_blank">https://doi.org/10.1002/wrcr.20463</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib10"><label>10</label><mixed-citation>
Chrisman, B. and Zreda, M.: Quantifying mesoscale soil moisture with the
cosmic-ray rover, Hydrol. Earth Syst. Sci., 17, 5097–5108,
<a href="https://doi.org/10.5194/hess-17-5097-2013" target="_blank">https://doi.org/10.5194/hess-17-5097-2013</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib11"><label>11</label><mixed-citation>
Desilets, D. and Zreda, M.: Spatial and temporal distribution of secondary
cosmic-ray nucleon intensities and applications to in situ cosmogenic dating,
Earth Planet. Sc. Lett., 206, 21–42, <a href="https://doi.org/10.1016/s0012-821x(02)01088-9" target="_blank">https://doi.org/10.1016/s0012-821x(02)01088-9</a>,
2003.
</mixed-citation></ref-html>
<ref-html id="bib1.bib12"><label>12</label><mixed-citation>
Desilets, D. and Zreda, M.: Footprint diameter for a cosmic-ray soil moisture
probe: Theory and Monte Carlo simulations, Water Resour. Res., 49,
3566–3575, <a href="https://doi.org/10.1002/wrcr.20187" target="_blank">https://doi.org/10.1002/wrcr.20187</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib13"><label>13</label><mixed-citation>
Desilets, D., Zreda, M., and Prabu, T.: Extended scaling factors for in situ
cosmogenic nuclides: New measurements at low latitude, Earth Planet. Sc.
Lett., 246, 265–276, <a href="https://doi.org/10.1016/j.epsl.2006.03.051" target="_blank">https://doi.org/10.1016/j.epsl.2006.03.051</a>, 2006.
</mixed-citation></ref-html>
<ref-html id="bib1.bib14"><label>14</label><mixed-citation>
Desilets, D., Zreda, M., and Ferre, T. P. A.: Nature's neutron probe: Land
surface hydrology at an elusive scale with cosmic rays, Water Resour. Res.,
46, W11505, <a href="https://doi.org/10.1029/2009wr008726" target="_blank">https://doi.org/10.1029/2009wr008726</a>, 2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib15"><label>15</label><mixed-citation>
Dong, J., Ochsner, T. E., Zreda, M., Cosh, M. H., and Zou, C. B.: Calibration
and Validation of the COSMOS Rover for Surface Soil Moisture Measurement,
Vadose Zone J., 13, <a href="https://doi.org/10.2136/vzj2013.08.0148" target="_blank">https://doi.org/10.2136/vzj2013.08.0148</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib16"><label>16</label><mixed-citation>
Evans, J. G., Ward, H. C., Blake, J. R., Hewitt, E. J., Morrison, R., Fry,
M., Ball, L. A., Doughty, L. C., Libre, J. W., Hitt, O. E., Rylett, D.,
Ellis, R. J., Warwick, A. C., Brooks, M., Parkes, M. A., Wright, G. M. H.,
Singer, A. C., Boorman, D. B., and Jenkins, A.: Soil water content in
southern England derived from a cosmic-ray soil moisture observing system –
COSMOS-UK, Hydrol. Process., 30, 4987–4999, <a href="https://doi.org/10.1002/hyp.10929" target="_blank">https://doi.org/10.1002/hyp.10929</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib17"><label>17</label><mixed-citation>
Franz, T. E., Zreda, M., Ferre, T. P. A., Rosolem, R., Zweck, C., Stillman,
S., Zeng, X., and Shuttleworth, W. J.: Measurement depth of the cosmic ray
soil moisture probe affected by hydrogen from various sources, Water Resour.
Res., 48, W08515, <a href="https://doi.org/10.1029/2012wr011871" target="_blank">https://doi.org/10.1029/2012wr011871</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib18"><label>18</label><mixed-citation>
Franz, T. E., Zreda, M., Rosolem, R., and Ferre, T. P. A.: A universal
calibration function for determination of soil moisture with cosmic-ray
neutrons, Hydrol. Earth Syst. Sci., 17, 453–460,
<a href="https://doi.org/10.5194/hess-17-453-2013" target="_blank">https://doi.org/10.5194/hess-17-453-2013</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib19"><label>19</label><mixed-citation>
Franz, T. E., Wang, T., Avery, W., Finkenbiner, C., and Brocca, L.: Combined
analysis of soil moisture measurements from roving and fixed cosmic ray
neutron probes for multiscale real-time monitoring, Geophys. Res. Lett.,
1–8, <a href="https://doi.org/10.1002/2015gl063963" target="_blank">https://doi.org/10.1002/2015gl063963</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib20"><label>20</label><mixed-citation>
Grayson, R. B. and Western, A. W.: Towards areal estimation of soil water
content from point measurements: time and space stability of mean response,
J. Hydrol., 207, 68–82, 1998.
</mixed-citation></ref-html>
<ref-html id="bib1.bib21"><label>21</label><mixed-citation>
Greacen, E. L. (Ed.): Soil water assessment by the neutron method, in: Soil
water assessment by the neutron method, CSIRO Australia, Adelaide, 1981.
</mixed-citation></ref-html>
<ref-html id="bib1.bib22"><label>22</label><mixed-citation>
Hawdon, A., McJannet, D., and Wallace, J.: Calibration and correction
procedures for cosmic-ray neutron soil moisture probes located across
Australia, Water Resour. Res., 50, 5029–5043, <a href="https://doi.org/10.1002/2013wr015138" target="_blank">https://doi.org/10.1002/2013wr015138</a>,
2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib23"><label>23</label><mixed-citation>
Holgate, C. M., De Jeu, R. A. M., van Dijk, A. I. J. M., Liu, Y. Y.,
Renzullo, L. J., Vinodkumar, Dharssi, I., Parinussa, R. M., Van Der Schalie,
R., Gevaert, A., Walker, J., McJannet, D., Cleverly, J., Haverd, V.,
Trudinger, C. M., and Briggs, P. R.: Comparison of remotely sensed and
modelled soil moisture data sets across Australia, Remote Sens. Environ.,
186, 479–500, <a href="https://doi.org/10.1016/j.rse.2016.09.015" target="_blank">https://doi.org/10.1016/j.rse.2016.09.015</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib24"><label>24</label><mixed-citation>
Kachanoski, R. and Jong, E.: Scale dependence and the temporal persistence of
spatial patterns of soil water storage, Water Resour. Res., 24, 85–91, 1988.
</mixed-citation></ref-html>
<ref-html id="bib1.bib25"><label>25</label><mixed-citation>
Kędzior, M. and Zawadzki, J.: Comparative study of soil moisture
estimations from SMOS satellite mission, GLDAS database, and cosmic-ray
neutrons measurements at COSMOS station in Eastern Poland, Geoderma, 283,
21–31, <a href="https://doi.org/10.1016/j.geoderma.2016.07.023" target="_blank">https://doi.org/10.1016/j.geoderma.2016.07.023</a>, 2016.
</mixed-citation></ref-html>
<ref-html id="bib1.bib26"><label>26</label><mixed-citation>
Klute, A.: Methods of soil analysis. Part 1. Physical and mineralogical
methods, American Society of Agronomy, Inc., 1986.
</mixed-citation></ref-html>
<ref-html id="bib1.bib27"><label>27</label><mixed-citation>
Köhli, M., Schrön, M., Zreda, M., Schmidt, U., Dietrich, P., and
Zacharias, S.: Footprint characteristics revised for field-scale soil
moisture monitoring with cosmic-ray neutrons, Water Resour. Res., 51,
5772–5790, <a href="https://doi.org/10.1002/2015wr017169" target="_blank">https://doi.org/10.1002/2015wr017169</a>, 2015.
</mixed-citation></ref-html>
<ref-html id="bib1.bib28"><label>28</label><mixed-citation>
McJannet, D., Franz, T., Hawdon, A., Boadle, D., Baker, B., Almeida, A.,
Silberstein, R., Lambert, T., and Desilets, D.: Field testing of the
universal calibration function for determination of soil moisture with
cosmic-ray neutrons, Water Resour. Res., 50, 5235–5248,
<a href="https://doi.org/10.1002/2014wr015513" target="_blank">https://doi.org/10.1002/2014wr015513</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib29"><label>29</label><mixed-citation>
Minasny, B., McBratney, A. B., and Whelan, B. M.: VESPER version 1.62, The
University of Sydney, NSW 2006, Australian Centre for Precision Agriculture,
2005.
</mixed-citation></ref-html>
<ref-html id="bib1.bib30"><label>30</label><mixed-citation>
Montzka, C., Bogena, H., Zreda, M., Monerris, A., Morrison, R., Muddu, S.,
and Vereecken, H.: Validation of Spaceborne and Modelled Surface Soil
Moisture Products with Cosmic-Ray Neutron Probes, Remote Sens., 9, 103,
<a href="https://doi.org/10.3390/rs9020103" target="_blank">https://doi.org/10.3390/rs9020103</a>,
2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib31"><label>31</label><mixed-citation>
NASA: US standard atmosphere, 1976, NOAA-S/T, Washington D.C., 1976.
</mixed-citation></ref-html>
<ref-html id="bib1.bib32"><label>32</label><mixed-citation>
Ochsner, T. E., Cosh, M. H., Cuenca, R. H., Dorigo, W. A., Draper, C. S.,
Hagimoto, Y., Kerr, Y. H., Njoku, E. G., Small, E. E., and Zreda, M.: State
of the Art in Large-Scale Soil Moisture Monitoring, Soil Sci. Soc. Am. J.,
77, 1888–1919, <a href="https://doi.org/10.2136/sssaj2013.03.0093" target="_blank">https://doi.org/10.2136/sssaj2013.03.0093</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib33"><label>33</label><mixed-citation>
Rayment, G. E. and Higginson, F. R.: Australian laboratory handbook of soil
and water chemical methods, Inkata Press Pty Ltd, 1992.
</mixed-citation></ref-html>
<ref-html id="bib1.bib34"><label>34</label><mixed-citation>
Renzullo, L. J., van Dijk, A. I. J. M., Perraud, J. M., Collins, D.,
Henderson, B., Jin, H., Smith, A. B., and McJannet, D. L.: Continental
satellite soil moisture data assimilation improves root-zone moisture
analysis for water resources assessment, J. Hydrol., 519, 3338–3352,
<br class="break"/>doi10.1016/j.jhydrol.2014.08.008, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib35"><label>35</label><mixed-citation>
Rivera Villarreyes, C. A., Baroni, G., and Oswald, S. E.: Inverse modelling
of cosmic-ray soil moisture for field-scale soil hydraulic parameters, Eur.
J. Soil Sci., 65, 876–886, <a href="https://doi.org/10.1111/ejss.12162" target="_blank">https://doi.org/10.1111/ejss.12162</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib36"><label>36</label><mixed-citation>
Rosolem, R., Shuttleworth, W. J., Zreda, M., Franz, T. E., Zeng, X., and
Kurc, S. A.: The Effect of Atmospheric Water Vapor on Neutron Count in the
Cosmic-Ray Soil Moisture Observing System, J. Hydrometeorol., 14, 1659–1671,
<a href="https://doi.org/10.1175/jhm-d-12-0120.1" target="_blank">https://doi.org/10.1175/jhm-d-12-0120.1</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib37"><label>37</label><mixed-citation>
Schrön, M., Rosolem, R., Köhli, M., Piussi, L., Schröter, I.,
Iwema, J., Kögler, S., Oswald, S., Wollschläger, U., and Samaniego,
L.: The Cosmic-Ray Neutron Rover-Mobile Surveys of Field Soil Moisture and
the Influence of Roads, Water Resour. Res., in review, 2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib38"><label>38</label><mixed-citation>
Smith, A. B., Walker, J. P., Western, A. W., Young, R. I., Ellett, K. M.,
Pipunic, R. C., Grayson, R. B., Siriwardena, L., Chiew, F. H. S., and
Richter, H.: The Murrumbidgee soil moisture monitoring network data set,
Water Resour. Res., 48, W07701, <a href="https://doi.org/10.1029/2012WR011976" target="_blank">https://doi.org/10.1029/2012WR011976</a>, 2012.
</mixed-citation></ref-html>
<ref-html id="bib1.bib39"><label>39</label><mixed-citation>
Vachaud, G., Passerat de Silans, A., Balabanis, P., and Vauclin, M.: Temporal
stability of spatially measured soil water probability density function, Soil
Sci. Soc. Am. J., 49, 822–828, 1985.
</mixed-citation></ref-html>
<ref-html id="bib1.bib40"><label>40</label><mixed-citation>
Van Dijk, A.: The Australian water resources assessment system, Technical Report 4, CSIRO, Canberra, 108 pp.,
2010.
</mixed-citation></ref-html>
<ref-html id="bib1.bib41"><label>41</label><mixed-citation>
Vereecken, H., Huisman, J. A., Pachepsky, Y., Montzka, C., van der Kruk, J.,
Bogena, H., Weihermüller, L., Herbst, M., Martinez, G., and Vanderborght,
J.: On the spatio-temporal dynamics of soil moisture at the field scale, J.
Hydrol., 516, 76–96, <a href="https://doi.org/10.1016/j.jhydrol.2013.11.061" target="_blank">https://doi.org/10.1016/j.jhydrol.2013.11.061</a>, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib42"><label>42</label><mixed-citation>
Viney, N., Vaze, J., Crosbie, R., Wang, B., Dawes, W., and Frost, A.: AWRA-L v4. 5:
technical description of model algorithms and inputs, CSIRO, Australia, 2014.
</mixed-citation></ref-html>
<ref-html id="bib1.bib43"><label>43</label><mixed-citation>
Vinodkumar Dharssi, I., Bally, J., Steinle, P., McJannet, D., and Walker, J.:
Comparison of soil wetness from multiple models over Australia with
observations, Water Resour. Res., 53, 633–646, <a href="https://doi.org/10.1002/2015wr017738" target="_blank">https://doi.org/10.1002/2015wr017738</a>,
2017.
</mixed-citation></ref-html>
<ref-html id="bib1.bib44"><label>44</label><mixed-citation>
Viscarra Rossel, R., Chen, C., Grundy, M., Searle, R., Clifford, D., Odgers,
N., Holmes, K., Griffin, T., Liddicoat, C., and Kidd, D.: Soil and Landscape
Grid National Soil Attribute Maps – Bulk Density – Whole Earth (3′′
resolution) – Release 1. v4, CSIRO Data Collection,
<a href="https://doi.org/10.4225/08/546EE212B0048" target="_blank">https://doi.org/10.4225/08/546EE212B0048</a>, 2014a.
</mixed-citation></ref-html>
<ref-html id="bib1.bib45"><label>45</label><mixed-citation>
Viscarra Rossel, R., Chen, C., Grundy, M., Searle, R., Clifford, D., Odgers,
N., Holmes, K., Griffin, T., Liddicoat, C., and Kidd, D.: Soil and Landscape
Grid National Soil Attribute Maps – Organic Carbon (3′′ resolution) –
Release 1. v1., CSIRO Data Collection, <a href="https://doi.org/10.4225/08/547523BB0801A" target="_blank">https://doi.org/10.4225/08/547523BB0801A</a>, 2014b.
</mixed-citation></ref-html>
<ref-html id="bib1.bib46"><label>46</label><mixed-citation>
Viscarra Rossel, R., Chen, C., Grundy, M., Searle, R., Clifford, D., Odgers,
N., Holmes, K., Griffin, T., Liddicoat, C., and Kidd, D.: Soil and Landscape
Grid National Soil Attribute Maps – Clay (3′′ resolution) – Release 1.
v4, CSIRO Data Collection, <a href="https://doi.org/10.4225/08/546EEE35164BF" target="_blank">https://doi.org/10.4225/08/546EEE35164BF</a>, 2014c.
</mixed-citation></ref-html>
<ref-html id="bib1.bib47"><label>47</label><mixed-citation>
Wallace, J., Macfarlane, C., McJannet, D., Ellis, T., Grigg, A., and Dijk, A.
v.: Evaluation of forest interception estimation in the continental scale
Australian Water Resources Assessment – Landscape (AWRA-L) model, J.
Hydrol., 499, 210–223, <a href="https://doi.org/10.1016/j.jhydrol.2013.06.036" target="_blank">https://doi.org/10.1016/j.jhydrol.2013.06.036</a>, 2013.
</mixed-citation></ref-html>
<ref-html id="bib1.bib48"><label>48</label><mixed-citation>
Western, A. W. and Blöschl, G.: On the spatial scaling of soil moisture,
J. Hydrol., 217, 203–224, <a href="https://doi.org/10.1016/S0022-1694(98)00232-7" target="_blank">https://doi.org/10.1016/S0022-1694(98)00232-7</a>, 1999.
</mixed-citation></ref-html>
<ref-html id="bib1.bib49"><label>49</label><mixed-citation>
Yang, L. and Kaleita, A. L.: Understanding Spatio-temporal Patterns of Soil
Moisture at the Field Scale, American Society of Agricultural and Biological Engineers Annual International Meeting,
Minneapolis, USA, 17–20 June 2007, ASABE Paper No. 072108, 2007.

</mixed-citation></ref-html>
<ref-html id="bib1.bib50"><label>50</label><mixed-citation>
Zreda, M., Desilets, D., Ferre, T. P. A., and Scott, R. L.: Measuring soil
moisture content non-invasively at intermediate spatial scale using
cosmic-ray neutrons, Geophys. Res. Lett., 35, L21402,
<a href="https://doi.org/10.1029/2008gl035655" target="_blank">https://doi.org/10.1029/2008gl035655</a>, 2008.
</mixed-citation></ref-html>
<ref-html id="bib1.bib51"><label>51</label><mixed-citation>
Zreda, M., Shuttleworth, W. J., Zeng, X., Zweck, C., Desilets, D., Franz, T.,
and Rosolem, R.: COSMOS: the COsmic-ray Soil Moisture Observing System,
Hydrol. Earth Syst. Sci., 16, 4079–4099,
<a href="https://doi.org/10.5194/hess-16-4079-2012" target="_blank">https://doi.org/10.5194/hess-16-4079-2012</a>, 2012.
</mixed-citation></ref-html>--></article>
